FEL bucket not level (Horizontally)

[brewdog]

I had a New Holland with that problem and the dealer told me to loosen all the Loader mounting frame bolts ( don’t remove the bolts) on a level surface then retighten the bolts after the loader frame is repositioned.

 

[mikester]

Your loader isn't crooked - when your machine was assembled at the factory in Korea it was made level. Since your tractor was imported, you are looking at it from a different latitude, so now it appears crooked. Import tariffs will fix your perception problem.

 

[bdhsfz6]

I had a New Holland with that problem and the dealer told me to loosen all the Loader mounting frame bolts ( don’t remove the bolts) on a level surface then retighten the bolts after the loader frame is repositioned.

This procedure helps but sometimes it isn't enough. I had to put a piece of 4X4 under the bucket edge on the high side and lift the front of the tractor off the ground with the FEL mounting bolts loosened.

I then used a long socket extension to tighten the bolts without getting under the tractor.

 

[masseyrider]

Buy a MF product and be issue free.