yanmar 336 d had the front end controller rebuilt last year .still leaking buy when back grading with bucket it will just roll over .and when lifting up it wants to dump the load . single lever .can I put on a two lever spooler say 3000 psi lifting from tractor supply . and what would I really need to buy .
fel
- Thread starter robert j
- Start date
- Views: 851
Not familiar with what Tractor Supply has to offer but if one like this then yes, it would work. You would need to assure you have the right connections for it and a mountable place. Chief 2 Spool Hydraulic 4 Way with 3-Position open Center Valve at Tractor Supply Co.
that is the one I was looking at when I made the post. just was not sure that it would work. I will check with the local yanmar dealer this week end. have not had much luck with them getting parts. also need a tie rod shaft the tie rod on left side striped out so I tighten it the best I could and drilled it and put a 16 penny nail through it .it works . need brakes they are shot to/
You need to look at this sight. They will have what you need. Yanmar Tractor Parts:
clemsonfor
Super Member
Yea look up Hoye Tractor parts, which is the link Winston Posted. They have everything you need, great prices and excellent customer service! Forget you local guy if you can get it all sitting in your chair and have all your questions answered and get the best price all while doing so then why not. Its best to support folks that are there to help and support you. They do this by recreating and also reengineering parts that are obsolete or can not be sourced from original sources anymore or parts that are prone to break, they make some of these parts inhouse, like the spindles for some 2wd machines. They also have made a spacer kit to get the rear tires out wider for a more stable stance.
Here are some similar links:
