Fencing

   / Fencing #12  
The process was.

1. Set an offset point.
2. Set up the transit at the offset point.
3. Shoot back to the original set up point.
4. Turn the appropriate angle from the original set up point.
5. Measure the appropriate distance to get back on the property line
6. Move the transit to the new point on the property line.
7. Shoot back to the offset point
8. Turn the appropriate angle to get back on the property line.
9. Continue setting property line pins.

With all the set ups needed, we avoided doing this as much as possible. I got real familiar with a brush hook /w3tcompact/icons/smile.gif to clear brush out of the way, but sometimes trees got in the way and we didn't have a choice.
 

Tractor & Equipment Auctions

2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A52377)
2019 Allmand...
BUYER'S PREMIUM INFO LOT NUMBER 2 (A53084)
BUYER'S PREMIUM...
(NEW) 2025 DOWN 2 EARTH GOOSENECK TRAILER (A51247)
(NEW) 2025 DOWN 2...
2004 CATERPILLAR 836G LANDFILL COMPACTOR (A51406)
2004 CATERPILLAR...
2015 Freightliner Bucket Truck - Terex TM 100 Boom - Cummins Diesel - Allison Transmission (A53473)
2015 Freightliner...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
 
Top