Rustyiron
Super Member
I'm happy with ya, enjoy!
Finally got my new Kubota delivered.
- Thread starter Deezl Smoke
- Start date
- Views: 9058
Luke'sScreenName
Elite Member
- Joined
- Mar 1, 2015
- Messages
- 3,710
- Location
- Lakes Region, NH
- Tractor
- Kubota MX4800 with BH-90X hoe; Hustler FastTrack 48; B3300SU (sold); 1969 Case 680B CK (sold)
Looks a lot like my B3300su with the bigger tires. You should also get more ground clearance.
check
Elite Member
- Joined
- Sep 26, 2008
- Messages
- 4,162
- Tractor
- 2009 Kubota BX25
I sat on one this weekend, and those steps are real flimsy.
varmint
Elite Member
- Joined
- Mar 17, 2003
- Messages
- 2,576
- Location
- Northern Maryland
- Tractor
- Kubota B8200, then a Kubota L3130 HST, now a Kubota L3400 HST
Looks almost like an "L" instead of a "B"! Curious about the wheels and tires- I know Kubota has a "build you own" or something like that on their website, but you really did! And, the step on our L3400 isn't flimsy, but then, I weigh 165 or so, maybe that's why? Anyway, looks very nice, and useful!
OP
Deezl Smoke
Silver Member
Yes, ya beat me to it. Not worth the effort as they tend to flex the otherwise nice floor board quite a bit. I think an aftermarket step should be looked into making and selling. With the over size tires, the step is a nice option, just not the factory ones. Otherwise, so far, that's about the only weakness IMO.
OP
Deezl Smoke
Silver Member
Congratulations.
Ta for the pics.
Now you need to change your profile from 'soon'.
Thanks for the reminder. I just updated it. I had forgotten about that. Thanks agains.
OP
Deezl Smoke
Silver Member
The L has that step no matter what, right? I think the L series step was engineered into it at the factory. This B step for large tire option, appears to be more of a "whoops, now we need a step quick" sort of deal. I think a brace or two can be looked at, but otherwise it pulls the floorboard down until it rests on something. Not far, but it does make it appear cheap. I'll see if I can get some pics and show what it does.
s219
Super Member
- Joined
- Dec 7, 2011
- Messages
- 8,607
- Location
- Virginia USA
- Tractor
- Kubota L3200, Deere X380, Kubota RTV-X
On all the Kubotas I have owned, the floor is mounted on rubber bushings to reduce vibrations, and that means it will flex a little when you climb aboard. Same deal with the L and the standard step. Nothing is wrong. I have seem some people here (one was a 300# guy) complain that the floor is flimsy, but I think they are not understanding that it's not attached rigidly and is floating on rubber. The same people would likely complain of foot numbness if the floor was welded in rigid.
I remember asking about getting the oversized tires when looking at the 2650 -- it's just the large tire option from the 3350 -- and was told it's possible but not recommended since it increases the effective final gear ratio and puts less torque down to the ground. I never did the math to see how much of a difference it would make. Since these light tractors are traction limited, I can't see that it would matter too much. But anyway, that is the reason Kubota offers the option on the 3350 but not on the 2650 on their "build my Kubota" website.
BTW -- new tractor looks great!
I remember asking about getting the oversized tires when looking at the 2650 -- it's just the large tire option from the 3350 -- and was told it's possible but not recommended since it increases the effective final gear ratio and puts less torque down to the ground. I never did the math to see how much of a difference it would make. Since these light tractors are traction limited, I can't see that it would matter too much. But anyway, that is the reason Kubota offers the option on the 3350 but not on the 2650 on their "build my Kubota" website.
BTW -- new tractor looks great!