Finally pulled the trigger.

   / Finally pulled the trigger. #1  

Jeepnford

Gold Member
Joined
Sep 7, 2008
Messages
422
Location
NE Missouri
Tractor
Case DX35
Well, I did it. I ordered a Hypertherm 45xp with a 50 ft. torch. Can't wait.
 
   / Finally pulled the trigger. #2  
Congrats! First thing I figured out when I fired up my new 45XP is that I badly need a cutting table with some kind of dust collection, water tray, or something. I see now why so many plasma cut outside of the shop. Holy cow, I couldn't stand the smell and debris in my shop the next day and I really didn't cut much. It's been so cold that I haven't played with it since Christmas day, the first time I used it.
 
   / Finally pulled the trigger. #3  
Congrats! First thing I figured out when I fired up my new 45XP is that I badly need a cutting table with some kind of dust collection, water tray, or something. I see now why so many plasma cut outside of the shop. Holy cow, I couldn't stand the smell and debris in my shop the next day and I really didn't cut much. It's been so cold that I haven't played with it since Christmas day, the first time I used it.


Coincidentally, MY table just did a dump today. :D

IMG_1360.JPG

Terry
 
   / Finally pulled the trigger.
  • Thread Starter
#4  
Congrats! First thing I figured out when I fired up my new 45XP is that I badly need a cutting table with some kind of dust collection, water tray, or something. I see now why so many plasma cut outside of the shop. Holy cow, I couldn't stand the smell and debris in my shop the next day and I really didn't cut much. It's been so cold that I haven't played with it since Christmas day, the first time I used it.

That might be my next project, to build a downdraft table. I'm thinking of rigging it up to an exhaust fan with something like a dryer vent to send the smoke outside.
 
   / Finally pulled the trigger. #6  
Ha! I was going to ask you Terry how exactly that worked when I saw your design earlier. Do you have downdraft venting ability too?

I use a Miller fume extractor. For just a few quick cuts I don't bother.

IMG_7358.JPG

BTW Jody shows building a downdraft table on Welding Tips and Tricks.

Terry
 
   / Finally pulled the trigger. #7  
I use a Miller fume extractor. For just a few quick cuts I don't bother.

View attachment 494481

BTW Jody shows building a downdraft table on Welding Tips and Tricks.

Terry
Gonna have to look for used one but I imagine it is too much a specialty item to get a good deal on one. I think I watched Jody's vid awhile ago. Will have to review.
 

Tractor & Equipment Auctions

(INOP) JOHN DEERE TS GATOR (A51247)
(INOP) JOHN DEERE...
2014 CATERPILLAR 303.5E CR EXCAVATOR (A52706)
2014 CATERPILLAR...
INOP/NON - RUNNING 1997 Procraft Fish/Ski Boat (A54865)
INOP/NON - RUNNING...
(20) Pack of New HD Black Bungee Tie Down Straps (A54865)
(20) Pack of New...
2017 Polaris 500 Ranger Diesel Utility Cart (A53421)
2017 Polaris 500...
2018 FORD F-350 (A55745)
2018 FORD F-350...
 
Top