Finally pulled the trigger.

   / Finally pulled the trigger. #1  

Jeepnford

Gold Member
Joined
Sep 7, 2008
Messages
422
Location
NE Missouri
Tractor
Case DX35
Well, I did it. I ordered a Hypertherm 45xp with a 50 ft. torch. Can't wait.
 
   / Finally pulled the trigger. #2  
Congrats! First thing I figured out when I fired up my new 45XP is that I badly need a cutting table with some kind of dust collection, water tray, or something. I see now why so many plasma cut outside of the shop. Holy cow, I couldn't stand the smell and debris in my shop the next day and I really didn't cut much. It's been so cold that I haven't played with it since Christmas day, the first time I used it.
 
   / Finally pulled the trigger. #3  
Congrats! First thing I figured out when I fired up my new 45XP is that I badly need a cutting table with some kind of dust collection, water tray, or something. I see now why so many plasma cut outside of the shop. Holy cow, I couldn't stand the smell and debris in my shop the next day and I really didn't cut much. It's been so cold that I haven't played with it since Christmas day, the first time I used it.


Coincidentally, MY table just did a dump today. :D

IMG_1360.JPG

Terry
 
   / Finally pulled the trigger.
  • Thread Starter
#4  
Congrats! First thing I figured out when I fired up my new 45XP is that I badly need a cutting table with some kind of dust collection, water tray, or something. I see now why so many plasma cut outside of the shop. Holy cow, I couldn't stand the smell and debris in my shop the next day and I really didn't cut much. It's been so cold that I haven't played with it since Christmas day, the first time I used it.

That might be my next project, to build a downdraft table. I'm thinking of rigging it up to an exhaust fan with something like a dryer vent to send the smoke outside.
 
   / Finally pulled the trigger. #6  
Ha! I was going to ask you Terry how exactly that worked when I saw your design earlier. Do you have downdraft venting ability too?

I use a Miller fume extractor. For just a few quick cuts I don't bother.

IMG_7358.JPG

BTW Jody shows building a downdraft table on Welding Tips and Tricks.

Terry
 
   / Finally pulled the trigger. #7  
I use a Miller fume extractor. For just a few quick cuts I don't bother.

View attachment 494481

BTW Jody shows building a downdraft table on Welding Tips and Tricks.

Terry
Gonna have to look for used one but I imagine it is too much a specialty item to get a good deal on one. I think I watched Jody's vid awhile ago. Will have to review.
 

Tractor & Equipment Auctions

48" QUICK ATTACH PALLET FORKS (A52706)
48" QUICK ATTACH...
2017 Toro Z-Master 7000 Series 70in Zero Turn Commercial Mower (A55787)
2017 Toro Z-Master...
2007 MACK CV713 WINCH TRUCK (A53843)
2007 MACK CV713...
Hyster H225E (A47384)
Hyster H225E (A47384)
2018 Toro Workman GTX Electric Utility Cart (A55851)
2018 Toro Workman...
BIG TEX 16 T/A TRASH TRAILER (A55745)
BIG TEX 16 T/A...
 
Top