Finish mower for Toolcat

[laurencen]

have to consider relocating the lights and mirror, where did you locate the lights? on another note I have cut about 20 acres of grass, the mower worked great and with the temp 40C it was cool inside, this mower was built in 2013, it was in great condition and spotless, now its filthy grass all over it, the previous owner either had lots of time on his hands or used it very little, do you guys just hose it off, pressure wash or how are you cleaning them

 

[ruffdog]

I took the mirrors off but kept the lights. I blow the deck off with compressed air. I raise the lift arm all the way up and tilt the front of the deck down to the ground. I have never had a build-up or clumping underneath. I snap a 5 gal paint filter net over the door to the A/C condenser so the fluff doesn't get in the fins.

 

[Xfaxman]

have to consider relocating the lights and mirror, where did you locate the lights?

I located the lights on a shelf in the shop. I have used the work lights a lot, but rarely used the headlights and never used the turn signals.

on another note I have cut about 20 acres of grass, the mower worked great and with the temp 40C it was cool inside, this mower was built in 2013, it was in great condition and spotless, now its filthy grass all over it, the previous owner either had lots of time on his hands or used it very little, do you guys just hose it off, pressure wash or how are you cleaning them

I also raise the lift arm up, tilt the front of the deck down and then blow it off with a cordless leaf blower.