First Project was Plasma Cutters anyone?

   / First Project was Plasma Cutters anyone? #11  
Russ, he got it all for free, I think from his reserve unit. And yes, he is rather generous, but he can be a serious PITA at times as well.
 
   / First Project was Plasma Cutters anyone? #12  
Roger that!!!!!!/w3tcompact/icons/eyes.gif
 
   / First Project was Plasma Cutters anyone? #13  
Nice looking trailer. The only problem is that it will show up in another forum with someone wanting to know if they can tow their BX1800 on it behind a Ford Pinto./w3tcompact/icons/grin.gif

Does it have trailer brakes?
 
   / First Project was Plasma Cutters anyone?
  • Thread Starter
#14  
<font color=red>Does it have trailer brakes? </font color=red>

You know I actually thought "You know it would be hard to put brakes on this thing, just tie them in to the electric motors"

My wife asked me what the point was in the the dumping action because our daughter would never use it. I said I did it because I could.
 
   / First Project was Plasma Cutters anyone? #15  
100lbs?? Was that a typo?? With 1 1/2 inch box that is one overbuilt trailer!!!!! Like you said - I think the gator's tongue weight is the limiting factor - not that trailer!!
 
   / First Project was Plasma Cutters anyone?
  • Thread Starter
#16  
Not a typo! I will take a picture of me standing in it. The 1.5"box tubing is thin wall, so it isn't very heavy.
 

Tractor & Equipment Auctions

MCELROY 500 SERIES 3 TRACKED FUSION MACHINE (A50854)
MCELROY 500 SERIES...
2020 INTERNATIONAL MV607 26FT NON CDL BOX TRUCK (A51222)
2020 INTERNATIONAL...
Bus (A50323)
Bus (A50323)
2015 Chevrolet Tahoe SUV (A49461)
2015 Chevrolet...
2012 CHEVROLET SILVERADO 2500HD (A50854)
2012 CHEVROLET...
2013 XLR THUNDERBOLT 35X14 5TH WHEEL CAMPER (A50854)
2013 XLR...
 
Top