First Project was Plasma Cutters anyone?

   / First Project was Plasma Cutters anyone? #11  
Russ, he got it all for free, I think from his reserve unit. And yes, he is rather generous, but he can be a serious PITA at times as well.
 
   / First Project was Plasma Cutters anyone? #12  
Roger that!!!!!!/w3tcompact/icons/eyes.gif
 
   / First Project was Plasma Cutters anyone? #13  
Nice looking trailer. The only problem is that it will show up in another forum with someone wanting to know if they can tow their BX1800 on it behind a Ford Pinto./w3tcompact/icons/grin.gif

Does it have trailer brakes?
 
   / First Project was Plasma Cutters anyone?
  • Thread Starter
#14  
<font color=red>Does it have trailer brakes? </font color=red>

You know I actually thought "You know it would be hard to put brakes on this thing, just tie them in to the electric motors"

My wife asked me what the point was in the the dumping action because our daughter would never use it. I said I did it because I could.
 
   / First Project was Plasma Cutters anyone? #15  
100lbs?? Was that a typo?? With 1 1/2 inch box that is one overbuilt trailer!!!!! Like you said - I think the gator's tongue weight is the limiting factor - not that trailer!!
 
   / First Project was Plasma Cutters anyone?
  • Thread Starter
#16  
Not a typo! I will take a picture of me standing in it. The 1.5"box tubing is thin wall, so it isn't very heavy.
 

Tractor & Equipment Auctions

2013 AMSIG S/A Solar Towable Message Board (A50322)
2013 AMSIG S/A...
2015 Infiniti QX60 SUV (A50324)
2015 Infiniti QX60...
SHOP MADE PROPANE TRAILER (A50854)
SHOP MADE PROPANE...
2023 New Holland CR10.90 Combine - 332 Engine Hours - 244 Separator Hours (A51039)
2023 New Holland...
Bad Boy Outlaw XP61 Zero Turn Mower (A48082)
Bad Boy Outlaw...
HOPKINS 40 TRI-AXLE DATA VAN TRAILER (A50854)
HOPKINS 40...
 
Top