First Project was Plasma Cutters anyone?

   / First Project was Plasma Cutters anyone? #11  
Russ, he got it all for free, I think from his reserve unit. And yes, he is rather generous, but he can be a serious PITA at times as well.
 
   / First Project was Plasma Cutters anyone? #12  
Roger that!!!!!!/w3tcompact/icons/eyes.gif
 
   / First Project was Plasma Cutters anyone? #13  
Nice looking trailer. The only problem is that it will show up in another forum with someone wanting to know if they can tow their BX1800 on it behind a Ford Pinto./w3tcompact/icons/grin.gif

Does it have trailer brakes?
 
   / First Project was Plasma Cutters anyone?
  • Thread Starter
#14  
<font color=red>Does it have trailer brakes? </font color=red>

You know I actually thought "You know it would be hard to put brakes on this thing, just tie them in to the electric motors"

My wife asked me what the point was in the the dumping action because our daughter would never use it. I said I did it because I could.
 
   / First Project was Plasma Cutters anyone? #15  
100lbs?? Was that a typo?? With 1 1/2 inch box that is one overbuilt trailer!!!!! Like you said - I think the gator's tongue weight is the limiting factor - not that trailer!!
 
   / First Project was Plasma Cutters anyone?
  • Thread Starter
#16  
Not a typo! I will take a picture of me standing in it. The 1.5"box tubing is thin wall, so it isn't very heavy.
 

Tractor & Equipment Auctions

Two Pairs of 10ft Fork Extensions (A53421)
Two Pairs of 10ft...
Kenworth Tri Axle Dump (A47384)
Kenworth Tri Axle...
2012 International 4300 Vacuum Excavation 7.6L Diesel Truck w/Vanair Vacuum (A51692)
2012 International...
2024 JOHN DEERE 8R 280 LOT NUMBER 7 (A53084)
2024 JOHN DEERE 8R...
2020 INTERNATIONAL LT625 TRI AXLE SLEEPER (A54607)
2020 INTERNATIONAL...
2014 FREIGHTLINER M2106 BUCKET TRUCK (A51406)
2014 FREIGHTLINER...
 
Top