ENG18LT
Platinum Member
Anyone ever put a patch inside a R1 tire?
Flat tire
- Thread starter ENG18LT
- Start date
- Views: 1309
oldnslo
Super Member
Depends on the size of the hole but yes for punctures like a nail hole you can patch them. A half inch rod thru the tire would require a boot and & or tube.
OP
ENG18LT
Platinum Member
Most likely a nail hole, have been tearing down an old building. Tire is a 9.5-25 tubeless R1.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
depends.
I have a tire on my 7610s that had something like a RR spike go thru.. you can stick yer finger thru the hole. it has a large 6" farm patch on the inside... and a new tube.. ( was tubed already ).
holding fine.
i HAVE used boots and old split tubes depending on rim and tire casing condition though.. just never know till you see it.. case by case basis. IMHO
I will say this though.. I always put some sort of patch.. even the small bike style patches on holes in tire casings if there is a tube.. otherwise the hole can bit the tube..
OP
ENG18LT
Platinum Member
Tire has 67 hours on it. If I put my finger on the hole I can stop the leak. Can't be bigger then 1/8", if that.
OP
ENG18LT
Platinum Member
I was able to plug it, thanks all.
chopped
Veteran Member
what kind of plug did you use?
OP
ENG18LT
Platinum Member
Just a regular one from TSC.
