Found an old Modern boxblade

[allen in texas]

Thanks for the link, I do plan on getting some rippers. I estimate the weight around 1100 -1200lbs. Good thing about the box blades, they are basically the same used as they are new, can't really were them out, I'm happy about the find.

May not be able to wear them out but you can dang sure bend the heck out of them. Ask me how I know.

 

[Poopdeck Pappy]

Streamin, the next time I'm out at my property, I'll take some pics and measurements of my scarifiers and the V-clips that hold them in place. I'll post them on here so you can at least determine whether it matches yours so you can include or eliminate the Gannon/Woods scarifiers and clips as a potential source for yours.

 

[Illini22]

Looks very similar to my gill sr20, with the hinged scarifiers and rear blade. As MTV ranch said, mine are the notched scarifiers with a rod running perpendicular to the points. It locks in behind the scarifiers and is held in place with hitch pins. I have also sheared a couple of shanks at the notches.

 

[streamin]

Streamin, the next time I'm out at my property, I'll take some pics and measurements of my scarifiers and the V-clips that hold them in place. I'll post them on here so you can at least determine whether it matches yours so you can include or eliminate the Gannon/Woods scarifiers and clips as a potential source for yours.

That would be great, I am only familiar with the one kind and not sure if those are the ones, thanks. BTW, they want about $450 to do the powder coating, will be waiting on that for now.

 

[94BULLITT]

That would be great, I am only familiar with the one kind and not sure if those are the ones, thanks. BTW, they want about $450 to do the powder coating, will be waiting on that for now.

I'd just paint it to match your tractor.

Sent from my GT-P3113 using TractorByNet

 

[RDrancher]

Here's a pic showing the scarifier clips on my Gannon, if it helps.


If you want to paint the BB, Sherwin Williams Sher-Kem (with the hardener) is tough stuff and looks good too. They can tint it pretty much any color you want. Both my trailer and Gannon were sprayed with it using a cheap HF gravity feed gun.

 

[lloyd430]

I agree TSC don't last but these hold up great!

 

[Poopdeck Pappy]

I'd just paint it to match your tractor.

If I paint any of my implements, I think I'll just paint them black. That way, I won't have to worry about it if I trade tractors.

 

[streamin]

Here's a pic showing the scarifier clips on my Gannon, if it helps.
View attachment 346998

If you want to paint the BB, Sherwin Williams Sher-Kem (with the hardener) is tough stuff and looks good too. They can tint it pretty much any color you want. Both my trailer and Gannon were sprayed with it using a cheap HF gravity feed gun.

Yes that helps, I think that is what I need however less common for aftermarket, thanks for taking that pic.

If I paint any of my implements, I think I'll just paint them black. That way, I won't have to worry about it if I trade tractors.

That is a great idea, it is a bit ironic that I paint vehicles all day for customers at my body shop but I am too lazy to do it on my own stuff, as the saying holds true... It is more the sandblasting that I don't care to do so the powder coating includes that but looks like I will be taking a day on the weekend to do it myself.

 

[RDrancher]

Sandblasting? Are you going to use it, or is this a piece of Modern art?... :laughing: