front end loader dump sticking

   / front end loader dump sticking #1  

turbinesurgun

Bronze Member
Joined
Sep 18, 2004
Messages
84
sometimes when you go to full dump, cylinders will stick. I have found that if you swap hoses and go back in it will work for a couple days and then do it again. This is a ml264 on a 6500 4x4
 
   / front end loader dump sticking #2  
There were a bunch of posts about loaders sticking on the Kubota forums. I dont remember the fix, but you could ask up there.

I think that thet were sucking air, not sure though.
 
   / front end loader dump sticking #3  
I had the valve changed on my ML265. The valve would not stay in float. It was like this when I got it.

Will
 

Tractor & Equipment Auctions

78'' skid steer bucket (A53421)
78'' skid steer...
Toro Z Master 2000 Zero Turn Mower (A50324)
Toro Z Master 2000...
2016 Great Dane 53FT Refrigerated Van Reefer Trailer (A51692)
2016 Great Dane...
2011 CIRCLE M 32 FOOT GOOSENECK (A53843)
2011 CIRCLE M 32...
2013 Big Tex 16GP-20 Gooseneck Trailer (A53117)
2013 Big Tex...
2022 Toro Workman 07921 Electric Utility Cart (A51691)
2022 Toro Workman...
 
Top