front end loader dump sticking

   / front end loader dump sticking #1  

turbinesurgun

Bronze Member
Joined
Sep 18, 2004
Messages
84
sometimes when you go to full dump, cylinders will stick. I have found that if you swap hoses and go back in it will work for a couple days and then do it again. This is a ml264 on a 6500 4x4
 
   / front end loader dump sticking #2  
There were a bunch of posts about loaders sticking on the Kubota forums. I dont remember the fix, but you could ask up there.

I think that thet were sucking air, not sure though.
 
   / front end loader dump sticking #3  
I had the valve changed on my ML265. The valve would not stay in float. It was like this when I got it.

Will
 

Tractor & Equipment Auctions

2011 Toyota RAV4 4x4 SUV (A51694)
2011 Toyota RAV4...
2016 Tesla Model S 85D Long Range AWD Sedan (A51694)
2016 Tesla Model S...
2015 Ford F-450 Bucket Truck (A53117)
2015 Ford F-450...
40' CONTAINER (A51244)
40' CONTAINER (A51244)
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
JOHN DEERE 3020 TRACTOR (A51247)
JOHN DEERE 3020...
 
Top