GC1720 and king cutter hog size

   / GC1720 and king cutter hog size
  • Thread Starter
#21  
I have not seen the chain setup. Do you adjust the top link shorter and simply put a chain around the end and the top of the cutter connection?
 
   / GC1720 and king cutter hog size #22  
I have not seen the chain setup. Do you adjust the top link shorter and simply put a chain around the end and the top of the cutter connection?
You remove the top link and replace it with a length of chain
 
   / GC1720 and king cutter hog size
  • Thread Starter
#23  
So adjustment is limited or not at all. Any drawbacks?
 
   / GC1720 and king cutter hog size #24  
Drawback is using too much chain and finding a dip where it the back of the cutter going up and the chain wraps around your PTO shaft


Edit: added picture for referenceView attachment 620124
 
   / GC1720 and king cutter hog size #25  
I wouldn't be able to use a 5 footer on the JD 2025R even though it has the hp (5 hp/ft) for it. The sides of the cutter would hang out past the rear wheels for about 6" on both sides. I'd be forever hanging it up on those front corners on the trails and other tight spots that I have to mow.

Had a 4 footer on the 18.5 hp JD 4010. Did fine with it but same issue to use a wider one, and it does not have the hp for a 5 footer.

Ralph
 
   / GC1720 and king cutter hog size
  • Thread Starter
#26  
I do have some hilly terrain
 

Tractor & Equipment Auctions

2015 Peterbilt 579 T/A Sleeper Cab Truck Tractor (A52377)
2015 Peterbilt 579...
AUCTION STARTS HERE @ 9AM (A52705)
AUCTION STARTS...
2008 FREIGHTLINER COLUMBIA (A53843)
2008 FREIGHTLINER...
NEW HOLLAND TURBO TRACTOR (A54756)
NEW HOLLAND TURBO...
2011 PETERBILT 384 TANDEM AXLE TANKER TRUCK AND TANKER TRAILERS (A54607)
2011 PETERBILT 384...
Pitts Tri-Axle RGN Lowboy Equipment Trailer (A50322)
Pitts Tri-Axle RGN...
 
Top