EddieWalker
Epic Contributor
When drilling the hole, make sure you are dead center. Drill the biggest hole you can without ruining the threads. For some holes, I have to drill a pilot hole, then the bigger one.
The reason for the biggest hole possible is so that you can fit the biggest easy out possible into the hole. They will break off on you from time to time and then it just gets to be allot more fun dealing with getting the broken off easy out, out of the hole.
Good luck,
Eddie
The reason for the biggest hole possible is so that you can fit the biggest easy out possible into the hole. They will break off on you from time to time and then it just gets to be allot more fun dealing with getting the broken off easy out, out of the hole.
Good luck,
Eddie