Good morning!!!!

/ Good morning!!!! #60,541  
Morning all!

Today's challenge is to try searching TBN for the best place to get SSQA Pallet forks. I'm going to use them for moving household goods in/out of storage trailer and some times construction materials.

Somehow I need to do this in and amongst everything else today...

Be well all,
David
 
/ Good morning!!!! #60,542  
Morning all!

Today's challenge is to try searching TBN for the best place to get SSQA Pallet forks. I'm going to use them for moving household goods in/out of storage trailer and some times construction materials.

Somehow I need to do this in and amongst everything else today...

Be well all,
David

David, I've had very good service from my Titan 48" x 5,500 lb. pallet forks.

48" Pallet Fork Attachment 55lb Capacity Tractor Forks skid steer quick tach

Titan's product line offers varying fork length and load capacities. Prices are reasonable and they're having a sale right now.

Titan Attachments - PalletForks.com - 8-65-8241

IMG_0176.JPG

I bought a pair of their fork extensions as well.

IMG_0779.JPG
 
/ Good morning!!!! #60,543  
David, I've had very good service from my Titan 48" x 4000 lb. pallet forks...

I'm on their site right now! LOL...

My DK50 FEL can lift ~2,700 lbs including the forks, and it is 72" wide, so which forks do I get? 2,500 pr 3,000 lb rated? How wide?

I'm a tad bit overwhelmed with choices... LOL...

I hate still being a n00b with 250 hours on my tractor... Sigh...

Thank you for the referral!

Be well,
David
 
/ Good morning!!!! #60,544  
I'm on their site right now! LOL...

My DK50 FEL can lift ~2,700 lbs including the forks, and it is 72" wide, so which forks do I get? 2,500 pr 3,000 lb rated? How wide?

I'm a tad bit overwhelmed with choices... LOL...

I hate still being a n00b with 250 hours on my tractor... Sigh...

Thank you for the referral!

Be well,
David

I had to edit my original post. I had ordered the 48" x 4000 lb. and Titan had them back ordered but, upgraded me to the 5,500 lb. forks for no extra cost.

I use mine on New Holland which has lift of 5,000 lbs and LS XR4046HC which has similar lift capacity as your tractor. If I was in your shoes I'd get the 48" forks with 4,000 lb. capacity. Weight difference between them and shorter lighter forks is not much IMHO.

You might get a bigger tractor some day too.

Edit: 48" is length of forks. The SSQA frames are all about same width.
 
/ Good morning!!!! #60,545  
/ Good morning!!!! #60,546  
You guys have a lot bigger tractors and equipment than I do, but most of you are trending more property, too. I couldn't even use most of the tractors y'all have. A super garden tractor like my 3208 or at most a sub compact, is all I can use. I enjoy reading about them, though.
 
/ Good morning!!!! #60,547  
Randy,

Good to see you buddy.

I bought them. Problem Solved...

Be well all,
David
 
/ Good morning!!!! #60,550  
Today's challenge is to try searching TBN for the best place to get SSQA Pallet forks. I'm going to use them for moving household goods in/out of storage trailer and some times construction materials.

Once you use those pallet forks a few times, you'll find all kinds of uses for them. I used to leave the 4-in-1 bucket on all the time, now it's the forks that live on the tractor. I can move more wood and brush with them, lift more because they weigh less than the bucket, and even do a little digging if I'm careful. The Titans look like a good choice!
 
/ Good morning!!!! #60,551  
Once you use those pallet forks a few times, you'll find all kinds of uses for them. I used to leave the 4-in-1 bucket on all the time, now it's the forks that live on the tractor. I can move more wood and brush with them, lift more because they weigh less than the bucket, and even do a little digging if I'm careful. The Titans look like a good choice!

RNG,

I'm sure you are right. I've heard many who praise their forks. And I can really use them now, so I jumped. But once you go Grapple you never go back...

99% of the time, Grapple is ON and I use it for EVERYTHING, lately I've used it to literally rip an entire 9' tall shrub out of the ground, root ball and all, to regrade the edges along the driveway, skid & haul giant logs/trees... I love my grapple...

Be well,
David
 
/ Good morning!!!! #60,552  
99% of the time, Grapple is ON and I use it for EVERYTHING, lately I've used it to literally rip an entire 9' tall shrub out of the ground, root ball and all, to regrade the edges along the driveway, skid & haul giant logs/trees... I love my grapple...

That's a strong endorsement if I ever heard one, David! I made my pallet forks after finding the tines in a bin at the junk yard; maybe I should go looking for scrap I can make a grapple with. I'm sure RS would consult on the design.:laughing: That's it just what I need: Another project!:confused2:
 
/ Good morning!!!! #60,553  
That's a strong endorsement if I ever heard one, David! I made my pallet forks after finding the tines in a bin at the junk yard; maybe I should go looking for scrap I can make a grapple with. I'm sure RS would consult on the design.:laughing: That's it just what I need: Another project!:confused2:
Be happy to supply the plans :D ... if I ever manage to recover the hard drive they are on ... :(
 
/ Good morning!!!! #60,554  
68°F and .14 inches rain.

New plumbing line installed at cottage.
Started new round of mowing. More today.
Flash recovering well from his dental adventure.
Shoulder almost back to normal after a few days on the meds.
Lent my PHD to neighbor putting in some new fence. I have to decide if refencing my property is beneficial to reclaiming pasture status vs the non pasture tax rate.
Finally got a decent shave this morning after disassembling and cleaning the head of my Norelco shaver. Amazing it cut anything. Ordered a replacement head as it is a few years old.

Be safe
Have a great day.
 
/ Good morning!!!! #60,555  
Interesting observation. My wife commented last night about the increase in wasps here. She has never been stung, these past two weeks - twice. They seem to hang around the pool a lot. And I am agreeing with her.

What's with the wasps this year? Wife has been stung twice, me once, first time in years for either of us.
 
/ Good morning!!!! #60,556  
David (MFW)
Great pics. Lots of work.

Don, hope you get some rain relief for your fire status. Enjoyed the pics though.
 
/ Good morning!!!! #60,557  
What's with the wasps this year? Wife has been stung twice, me once, first time in years for either of us.

Got bit on the neck yesterday. Killed that sucker and found the rest. They are all smelling the roses now.
Had wife clean the bite up and put some antibiotic ointment on it. So far I have not been allergic to the bites.
 
Last edited:
/ Good morning!!!! #60,558  
What's with the wasps this year? Wife has been stung twice, me once, first time in years for either of us.

Got bit on the neck yesterday. Killed that sucker and found the best. They are all smelling the roses now.
Had wife clean the bite up and put some antibiotic ointment on it. So far I have not been allergic to the bites.

My trainee told me he had to kill the largest wasp nest he's ever seen. His fiance's grandpa had an old queen mattress set leaning against a wall in an old barn. The nest stretched nearly the 6 feet length, in the old box frame and was allmost halfway down from the top. That would make it at least 8 square feet??? He said he "gowned up" with a sand blasting helmet and a heavy coat and ski bibs. Took 2 cans of Raid wasp killer (the best), and went in and started spraying.
 
/ Good morning!!!! #60,559  
My afternoon started out poorly, the shed with my tractor ZTR, power tools, an air compressor, commercial sewing machine, pressure washer, tow behind sprayer, and much more, burned down. Blistered the siding on the house, and garage. What a mess!IMG_2984.JPGIMG_2989.JPGIMG_3025.JPGIMG_3031.JPGIMG_3034.JPG
 
Last edited:
/ Good morning!!!! #60,560  
Oh my!!
What was the cause?
 

Marketplace Items

2016 Kubota SVL75-2 (A53317)
2016 Kubota...
iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A59228)
iDrive TDS-2010H...
2025 MACK GRANITE GR64F DUMP TRUCK (A59823)
2025 MACK GRANITE...
2019 KUBOTA KX033-4 EXCAVATOR (A60429)
2019 KUBOTA...
2011 GROVE TMS900E TRUCK CRANE (A58214)
2011 GROVE TMS900E...
UNUSED FUTURE 350 HYD BREAKER HAMMER (A52706)
UNUSED FUTURE 350...
 
Top