Good morning!!!!

   / Good morning!!!! #202,341  
Long day measured job got to price Mrs having bad day continues now wants to go home does not live here cannot stand our home does not love me this time is bad and not getting better.

Sorry to complain until she gets help this will descend into chaos I fear.

Got up to 39 21 now may have a job to start next week gravel only but it’s work right. General manager got the job he is special.

May all have a good night
 
   / Good morning!!!! #202,342  
Good morning all,
-1° now highs in the mid/upper 20’s and mostly sunny today. Winds WSW 5-10 mph.

Usual Saturday morning dump run then just a “see what happens” kind of day.

Buppies praying for you and your Mrs.
 
   / Good morning!!!! #202,344  
Coffee is brewing. 13° with cloudy skies this morning. Heading to 32° with partly cloudy skies. Spent way to much time in shop yesterday. 5 hours is more that my body likes. Did use shop stool when I could. Did get one part of pin attachment done. Moving pacing of brackets out 3". Next changing location of top pin by .5" May not get at that today. Have not recovered from yesterday yet. Need a conserve energy day.
AR5L0AQ.jpg


Everyone stay well and safe.

Good Morning All.
 
   / Good morning!!!! #202,349  
-3F partly cloudy sky low 20's for high.

Outside chores done E muffin time.
Plans for today...4 hours at part store afternoon not sure yet.

Enjoy your day all.
 

Attachments

  • Beaver.jpg
    Beaver.jpg
    193.3 KB · Views: 88
   / Good morning!!!! #202,350  
good morning all
10 out now going up to mid 30's today in sunshine.
no plans for today other than some errands.
Will see if the car runs nicely now that I injected two grand worth of repairs into it.
Reading a dealership bill is quite entertaining, if one wasn't paying for it...
suv goes back in next week for full detail, then it will be done.

motorhome goes into rv shop March 1, to fix the bathroom leak, and then it will be put up for sale.
then I will start looking for a travel trailer to pull with Ford. Trying to get one with 50 amp service with two
a/cs that weighs less than 9000 pounds. Not easy to find. I like this one, but slightly over the gvw limit.
I usually travel with empty tanks so can easily keep under limit but....
this one checks all the boxes, kitchen island, rear living room, 50 amps.

will try to find a used version of this model, though Alliance is a fairly new brand.
lots of opinions on how much one can tow. Absolutely will need a weight distributing hitch.
one rule of thumb I always followed is being careful when weight of trailer exceeds weight of tow vehicle.
Expedition comes with standard max tow and anti sway electronics, and electronic shocks. But not auto leveling.
So my concern is tongue weight and how much back end dips down. Was really spoiled with Ram truck last time that had air bags on all
four corners and self leveled when towing. Now that was nice.
 
   / Good morning!!!! #202,351  
and for all of you who have owned rvs.
this is the sales figures for industry last year.
Very revealing that only companies increasing business are those that are known for
leading in quality of build. Consumers are really tired of poorly built, and particularly poorly plumbed rv's.

these negative numbers have to be considered in light of unusually high sales during covid, huge number of units out there so no surprise
things have slowed down. big numbers too.

1737802655696.png
 
   / Good morning!!!! #202,352  
Good morning TBN!!
15 this morning and supposed to be pushing 50 under partly clouds this afternoon.

Correlation between the cold and the walks are quite evident. Lots of dog walking in the afternoon. :)
Puttered and walked yesterday. Probably more of the same today except dump run and errands.

Bring on spring!
Everyone have a great and safe day!!
 
   / Good morning!!!! #202,353  
Good morning, the low is 12 and going to a high of 27°F. Wind SSE 9 mph. Flurries today and tonight.
Block heater is turned on. I'll probably go out and plow this afternoon, maybe. Depends on how much comes down.

I got a call from the accounts receive-able lady at the fuel oil supplier yesterday. I guess she had a heart attack when she saw the $925.oo payment on a $200.oo positive account. I told her that since the bank doesn't pay any interest that they might as well have the money, that way when I order fuel I wont be owing them any money. I hate being behind the 8 ball and robbing Peter to pay Paul. With any kind of luck and a decent income tax rebate (should be a good one) they will be getting 3 or 4 thousand.

Speaking of space station, back in my partying days I was called a space cadet many times. I am kinda glad those day are behind me now.

Already got my goobers into me, so it is time for breakfast before they rot my guts out.

Have a safe day all
 
   / Good morning!!!! #202,354  
good morning, 13 to start with making it above freezing this afternoon yea

My finger is recovering but it limits what I can get into. The good news is that my rotator cuff injury seems to have healed after more than a year. And being on the other side comes in handy now the left side is limited.

Cody suffered a seizure and flopped down on the floor. Hard to watch. Recovered after 20 mins
 
   / Good morning!!!! #202,357  
Good Morning from Central Texas.
6am 32 degrees. High about 60 ?

The USAF is replacing the LGM-30 Minuteman III with the LGM-35A Sentinel ICBM. It is slated to replace all 450 Minuteman III missiles from 2029 through 2075. The Minuteman missiles are currently stationed in North Dakota, Wyoming, Montana, and Nebraska. Range is claimed at 6000 miles.

1737808151530.png


Hope all have a great day.
 
   / Good morning!!!! #202,358  
Good Morning,
Vt, 6 to start going to 22 ! Sitting in front of the wood stove this morning with coffee ! Looks overcast now hopefully some sun later ! Kathleen and I watched a good movie last night although I can’t remember the name right now !😀

Buppies, prayers your way , hopefully you can get some help ! 🙏

Drew, good luck in the trailer hunt ! The good news is that you know what you want at this stage of the game !

Supposed to take delivery on new unit this morning some time between 8 and 12!so I better get moving and get dressed !

Hope all have a good day ! 🙏
 
   / Good morning!!!! #202,359  
Good Morning
It’s 10° and won’t quite see 30 today under a clear sky.

Yesterday went by pretty quickly.

I did some experimenting with the plasma table, trying to better understand the piercing process and its various settings, and how they influence the process. One of the challenges of building a system is that there is no overall tech support. My plasma cutter, torch and table setup is unique to me. The good news is that once I completely understand the nuances, I can be my own tech support. It didn’t help that I’m completely new to the plasma cutting process.
At any rate by editing the G code and seeing the effect of each change, I made great progress, and working with the code directly was a huge help in understanding the entire process. I was able to pierce and cut a 1.625” hole in a piece of 1/2” steel with no discernible taper and a good pierce as a result of my experiments. It was the piecing that was giving me fits. You can see some failed pierces in the picture.

IMG_6015.jpg



I cleaned out several filing cabinet drawers, got rid of lots of old paperwork, old contracts, car purchase receipts and window sticks for vehicles that have been long gone etc.

Only service call was no water at the oddfellows lodge. There is a well pit outside, that has a heat lamp as well as heat tape for these rare extended cold spells. The heat lamp was burned out and it froze. Nothing appeared to have burst, so a bulb replacement and some time should take care of it. Left a spare bulb in the pit.

IMG_2131.jpg


Son and I got a lot of trash to the street, the totes were definitely a two person lift to hook them on and off the brackets on the carryall.

Never got around to lighting the fire, it was all set, maybe it was because it was warmer outside (almost 30), or I was busy, but now I don’t have to start the day with cleaning the fireplace.

Not a lot planned for today, I told a friend that I would help him with his manual J calculations for an addition. The time is well spent if it provides good heat load and loss calculations so the HVAC can be properly sized. And…. He needs it to get a building permit.
Might be a good day to take the little plane to lunch.
 

Attachments

  • IMG_6015.jpg
    IMG_6015.jpg
    556.9 KB · Views: 48
   / Good morning!!!! #202,360  
Good morning! Yikes the temp just dropped below freezing 30.6˚F, not a hard freeze so I hope all my exposed plants survive. The potatoes did not survive the teens earlier this week even under the hay.
High today will be in the upper 50s S wind. I mowed the back yard in a short sleeve t-shirt yesterday (55˚), something I could never do in the Fall.

Got a response from Amazon pool robot people they will be sending a shipping label to return the 2nd replacement robot. They were nice enough to send a free replacement so I did not want to take advantage of their mistake.

No salt taste in the water after last nights water softener regeneration cycle so the seals were the problem that is now fixed.

Buppies hope you can get the help you need with Holly.
 

Marketplace Items

2021 Ford F350 XL (A57148)
2021 Ford F350 XL...
Bell 1600 Gallon Nurse Trailer (A61307)
Bell 1600 Gallon...
2016 HAMM H7i SMOOTH DRUM ROLLER (A60429)
2016 HAMM H7i...
1987 CATERPILLAR D6H HIGH TRACK CRAWLER DOZER (A52709)
1987 CATERPILLAR...
PALLET OF (3) CABINETS (A60432)
PALLET OF (3)...
2007 TUG GPU 400/60 28V 60kVA Towable Diesel Generator (A59228)
2007 TUG GPU...
 
Top