jmc
Elite Member
- Joined
- Jul 21, 2003
- Messages
- 3,070
- Location
- SW Indiana
- Tractor
- Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST
Good thread.
If a DIY project, maybe the mesh should be a replaceable insert instead of welding it in. Make two or three while we're at it. Or lay the bent one down on concrete, drive over it a couple of times, and remount it...
If a DIY project, maybe the mesh should be a replaceable insert instead of welding it in. Make two or three while we're at it. Or lay the bent one down on concrete, drive over it a couple of times, and remount it...