Reb954
Platinum Member
I can't think of any reason why you should change the oil but if you do, use hyd. jack oil.
Harbor Freight Tools that don't suck
- Thread starter Travelover
- Start date
- Views: 4288522
I can't think of any reason why you should change the oil but if you do, use hyd. jack oil.
stuckmotor
Super Member
- Joined
- Sep 23, 2009
- Messages
- 5,303
- Location
- Lower Up State S.C.
- Tractor
- AC WD 34 hp/3500 lbs MF 261 60 hp/5380 lbs
As I checked out the other day and got my free blue flashlight, the girl at the counter remarked that I must have a case.
Diggin It
Super Star Member
Any of you that use the various wheel or pulley pullers, can you chime in here?
https://www.tractorbynet.com/forums...d-rotary-cutters-post5669958.html#post5669958
https://www.tractorbynet.com/forums...d-rotary-cutters-post5669958.html#post5669958
Peter 315
Elite Member
Fallon
Super Member
Pretty much any oil should work fine in a manual jack. Engine oil, hydraulic oil, whatever as long as its clean. Even then most grit should settle to the bottom & just stay there. It's not like it's high precision or high speed like a HST. Less moving parts or precision than an old 8n that worked fine with oil from 50 odd years ago.
lostcreekranch
Elite Member
- Joined
- Dec 14, 2012
- Messages
- 4,947
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,995
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
KUBOTA super udt2.....
Maybe, maybe not. I use straight 30 weight non detergent motor oil. Same stuff goes in the pump on my pressure washer.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,995
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Left it there for ya..
KubotainNH
Veteran Member
I brought back the pipe expander I mentioned earlier. My 1 star review still didn't post but I see new ones with 5 stars.
On the proper side of this thread I bought the tech cart and side table for a total of $160. Aside from the instructions the purchase looks like it will be a good one.
On the proper side of this thread I bought the tech cart and side table for a total of $160. Aside from the instructions the purchase looks like it will be a good one.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,995
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
On my 6th or 7th year on the HF 2100 PSI gas pressure washer with the 6.5 horse Pred motor. Still runs like a top. Original plug. Clean the air filter foam every year and change the oil in the motor and pump every year too. Straight 30 weight non detergent in the pump and 15-40 Rotella in the engine. I did have to replace the hose with a new one. The hose finally gave out. Been washing farm tractors and implements and the cars and trucks right along. Excellent pressure washer.
