Grapple Has anyone used Unlimited Fabrications?

[enterprisebbc]

They have a nice log grapple for my CK 35 Kioti QA for $1300. They look reputable an the price is good. I want a single piston fork grapple for limbs and brush. Has anyone heard of em?

 

[MtnViewRanch]

I have one of their root grapples and a set of loader forks. No complaints from me. I have had them for 8 years.

 

[enterprisebbc]

Thanks. I didnt know if they were a fly by night. I'm going to order their single piston fork grapple for my CK35. He said 3 1/2 wks for del. Seems like a lot but guess I'll have to wiat. Did you pay shipping?

 

[MtnViewRanch]

My parts were will called. I had another shipment coming my way from another source, so they picked them up for me.
So, to answer your question, no I did not pay them shipping.

 

[enterprisebbc]

thanks

 

[wjb-49]

Thanks. I didnt know if they were a fly by night. I'm going to order their single piston fork grapple for my CK35. He said 3 1/2 wks for del. Seems like a lot but guess I'll have to wiat. Did you pay shipping?

I have not seen Unlimited Fabrications mentioned often on TBN, are you pleased (if you have received it) with your grapple? They are located relatively near me and I like the look of their HD Root Grapple.

Thanks.

 

[MtnViewRanch]

I have not seen Unlimited Fabrications mentioned often on TBN, are you pleased (if you have received it) with your grapple? They are located relatively near me and I like the look of their HD Root Grapple.

Thanks.

I don't think that they build one small or light enough for most of the TBNers. I have been happy with my HD unit, but then I have 3900lb full height lift capacity.

 

[wjb-49]

Brian,

Thanks for your reply. Your 7520 has 25 more hp than my 340B and can surely handle almost anything! Am I correct that you have the Extreme Root Grapple? I am interested in their Heavy Root Rake and have some questions about its specs that are not answered on their web site. I have emailed Roger at Unlimited regarding fabrication of a Skid Steer Conversion unit and am going to call him today regarding the conversion and grapple.

I started a thread titled "Quick Attach and Grapple for Industrial Tractor?" and you and your company were named by member Piston as a possible source for the hydraulics upgrade needed for my conversion. Do you offer what I will need?

Thanks!

 

[MtnViewRanch]

Brian,

Thanks for your reply. Your 7520 has 25 more hp than my 340B and can surely handle almost anything! Am I correct that you have the Extreme Root Grapple? I am interested in their Heavy Root Rake and have some questions about its specs that are not answered on their web site. I have emailed Roger at Unlimited regarding fabrication of a Skid Steer Conversion unit and am going to call him today regarding the conversion and grapple. I started a thread titled "Quick Attach and Grapple for Industrial Tractor?" and you and your company were named by member Piston as a possible source for the hydraulics upgrade needed for my conversion. Do you offer what I will need?

Thanks!

Actually they did not offer the Extreme Root Grapple 8+ years ago. Mine is the HD unit. I have diverter valves, but I can not match that $300 that was mentioned. I can get you my econo setup for about $400, normal system is $500. The only difference is that the valve is a bit rougher looking and not painted or plated. Not as refined of a finish as most of the diverters you see. This would be everything other than however you decide to mount it. You mount it, get me hose lengths and I get you hoses that fit your tractor.

 

[wjb-49]

Actually they did not offer the Extreme Root Grapple 8+ years ago. Mine is the HD unit. I have diverter valves, but I can not match that $300 that was mentioned. I can get you my econo setup for about $400, normal system is $500. The only difference is that the valve is a bit rougher looking and not painted or plated. Not as refined of a finish as most of the diverters you see. This would be everything other than however you decide to mount it. You mount it, get me hose lengths and I get you hoses that fit your tractor.

Would you post on TBN or send by PM photos of the two systems you have. Would a diverter system work with my tractor's 21.5 gpm hydraulic flow rate?

Ultimate Fab 72" HD Root Grapple

• Cylinders-2" bore and a 10" stroke
• Opening - 36" H x 38" D
• Steel - 1/2" Grade 50, 3" square tubing, 3" pipe
• Line routing - Enclosed
• Weight - 750 lb.
• Tooth spacing - 9"
• Recessed grease fittings -
• Option - Cylinder rod covers
• Colors - Black, dk. gray, JD green, Cat yellow, orange
• Price - $1769.00

Skid Steer Conversion - No specs stated, will take about three weeks to fabricate. This one is about $225.00 less than a similar unit offered by another nearby fabricator.

Please let me know if this is built like your HD Grapple. I am a little concerned that the square tubes are 3" rather than 4".

 

[MtnViewRanch]

Would you post on TBN or send by PM photos of the two systems you have. Would a diverter system work with my tractor's 21.5 gpm hydraulic flow rate?

Ultimate Fab 72" HD Root Grapple

• Cylinders-2" bore and a 10" stroke
• Opening - 36" H x 38" D
• Steel - 1/2" Grade 50, 3" square tubing, 3" pipe
• Line routing - Enclosed
• Weight - 750 lb.
• Tooth spacing - 9"
• Recessed grease fittings -
• Option - Cylinder rod covers
• Colors - Black, dk. gray, JD green, Cat yellow, orange
• Price - $1769.00

Skid Steer Conversion - No specs stated, will take about three weeks to fabricate. This one is about $225.00 less than a similar unit offered by another nearby fabricator.

Please let me know if this is built like your HD Grapple. I am a little concerned that the square tubes are 3" rather than 4".

I believe that it is. Mine is the 81" unit. I can't go out and check, it is about a 2 1/2 hour drive to confirm. As far as the diverters, the units I sell are not rated for your pumps capacity, (13 & 15GPM) but you are not using that capacity to operate a grapple. The rated capacity is important when there is a continuous flow and you are not using it for that purpose, are you? I'll see what I can do about some pics, but I don't think that you can PM pics using TBN's system.

 

[wjb-49]

I believe that it is. Mine is the 81" unit. I can't go out and check, it is about a 2 1/2 hour drive to confirm. As far as the diverters, the units I sell are not rated for your pumps capacity, (13 & 15GPM) but you are not using that capacity to operate a grapple. The rated capacity is important when there is a continuous flow and you are not using it for that purpose, are you? I'll see what I can do about some pics, but I don't think that you can PM pics using TBN's system.

Thanks for explaining the rated capacity/continuous flow factor. I feel even better about my buying decision after you confirmed you have the same style grapple I am buying and that you have been pleased with yours.

Please see my PM. Thanks.