Hello-Need Some Electrical Advice

   / Hello-Need Some Electrical Advice #11  
Sometime My 675 will not start and it is the connector on the pto switch. I guess dust or mud gets in it as it is under the rear axle. There is also a neutral safety switch on the trans. You can bypass both the PTO and neutral switch by unplugging them and jumping the two wires together with a piece of wire.
 
   / Hello-Need Some Electrical Advice
  • Thread Starter
#12  
Been too wet to really do anything before now, but I got back on it today. I got it running.

While tracing wires, I found there is more than one ground. On the hidden ground, the crimped steel connector had rusted, breaking the ground. Ants had also clustered on the switch poles for lights. So even after fixing the ground, it took a little more work.

Again, I thank you all for the help. Y'all stay well. :thumbsup:
 

Tractor & Equipment Auctions

2010 UTILITY TRAILER MFG. CO. 53 FOOT FLATBED (A53843)
2010 UTILITY...
2012 Trail-Eze TE801 48ft 50 Ton Slide-Axle T/A Tilt Trailer (A51691)
2012 Trail-Eze...
2016 Ford Explorer AWD SUV (A51694)
2016 Ford Explorer...
2013 BIG TEX BIG TEX (A53843)
2013 BIG TEX BIG...
2010 CHEVROLET SILVERADO 1500 (A53843)
2010 CHEVROLET...
1985 Miller Wildcat 350-D Welder (A51691)
1985 Miller...
 
Top