I have a Farmtrac 45, and it won't start. The gauges generally won't even move if the key is turned, although I have reached underneath and wiggled some wires and they will move and immediately stop. My guess is the ignition switch or some sensor (I think there's one on either the clutch pedal or the transmission) is bad. Maybe some relay, although I haven't taken any sheetmetal off. The battery was taken to an auto parts store and tested. It showed to be fine.
Does anybody have ideas on what might be bad and how to test the components? Or even bypass stuff? I tried to jump across the solenoid, but that didn't work. I'm guessing it was because the clutch/range sensor wasn't engaged..maybe I should wire the clutch pedal down when I jump across the solenoid? I know the range and speed are both in neutral when I tried it.
Thanks in advance for any help.
Does anybody have ideas on what might be bad and how to test the components? Or even bypass stuff? I tried to jump across the solenoid, but that didn't work. I'm guessing it was because the clutch/range sensor wasn't engaged..maybe I should wire the clutch pedal down when I jump across the solenoid? I know the range and speed are both in neutral when I tried it.
Thanks in advance for any help.