Help identfy this

[ctp13]

WE inhereted this Long Tractor IT had a Box scraper of unknown make I have had lots of trouble with the teeth on this it has many home made mods I have no idea what might be stock and would like to know what a "stock" one looks like and how it works.

I will post pics to a smugmug site CTP13 : photos : Box scraper- powered by SmugMug


Thanks

 

[Farmwithjunk]

Looks like an older Gannon box I've seen.

 

[ctp13]

Thanks I thought it was a Gannon what I realy need to know IS how it is suposed to be set up.

as you can see there is a large Cylinder on back/top opperating ( well suposed to be opperating) the rippers.

Every small pic I have seen of a Gannon shows a very small Cyl in a vertical position to opperre the rool over bar.

Mine just bends whatever it is attached to. I know the size of that cyl is over kill ( by many thousands of pounds)

SO if any of you have a Gannon ( or reckognose what this is) and have pics of your cyl set up that would be very helpfull.

as you can see when I need the rippers I have to manualy lower them . which is far easer than when I have to put them back.

I have some land to scrape that isd full of Big rocks and would like to rip it first.

Thanks BTW this is a great site and some if not all f you are very handy from the Home built things I have seen here.

Chuck in Plymouth CA