Help Removing Knob

[PILOON]

Heat gun or hot water will do the trick. Most are a basic poly and press fitted on a flat shaft that has barbs to aid retention.
L.O.L., mine also falls off from time to time as a previous poster mentioned. Slip the claws of a hammer over the shaft and pull.

 

[David_Kb7uns]

Had to pull one of a BX last year and somebody had put adhesive on it, it was a pain to remove.

David Kb7uns

 

[skyhook]

There must be a women around there who has had experience with knobs...

 

[kcender]

heat gun or hair dryer will do the trick

Tried using a heat gun,worked like a charm.The knob came off with a good tug.I had to tap it back on so I don't think it will fall off.One thing to do is put a wet rag around the knob so as not to melt the plastic trim piece.