Help w/ missing throttle linkage piece!!

   / Help w/ missing throttle linkage piece!! #1  

Coyote

Silver Member
Joined
Jul 8, 2003
Messages
191
Location
North Carolina
Tractor
Yanmar 2000B & Skat Trak 1300D skid steer
While using my YM 2000B this weekend, something fell off my throttle linkage and now it will not stay in position, it just springs back. I don't know what it looks like, but there is a bracket there with a threaded hole and nothing attached. The bracket has a twist in it and one threaded hole. I suspect that is where the tension piece went. Does anyone have, or can you take a picture of their linkage to help me identify it? I took a picture but it's not digital, just print. Can anyone help me? Thanks in advance!
 
   / Help w/ missing throttle linkage piece!!
  • Thread Starter
#2  
I found a post on a friction disk. I think that may be my problem. Where exactly does it go? After this happened, my throttle lever had more side to side movement. A picture or description would be a big help!
 
   / Help w/ missing throttle linkage piece!! #3  
Coyote,
I'm guessing the 2000B uses the same type friction disk that my YM1700 did. Mine split in two and slipped out. Long time before I figured out what was wrong. If I remember right it fits right behind a round plate at the base of the throttle lever.
 

Tractor & Equipment Auctions

1981 CASE 580D BACKHOE (A51242)
1981 CASE 580D...
Bron V75-3 Pull-Behind Hydraulic Vibratory Utility Plow (A49461)
Bron V75-3...
2015 Ford F-150 Ext. Cab Pickup Truck (A50323)
2015 Ford F-150...
2017 Ford F550 4x4 Bucket Truck - 45FT Terex TL40 Boom, Powerstroke Diesel, Utility Bed, 54K Miles (A51039)
2017 Ford F550 4x4...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2024 Case IH Magnum 340AFS CVX Connect MFWD Tractor (A50657)
2024 Case IH...
 
Top