Herb46

[Herb46]

This is my first time on this site and like some others I was looking for some particular parts and found this site. I have not done much when comes to farming or gardening since my forties and I was hoping to get back into now, even though I have been retired for a number of years. I hooked up an old Dearborn disc plow (we called it a tiller) and after doing some tilling, the blades (discs) were all beat up and in need of replacing. It is a two 22 inch disc plow, model number 10-246 and the serial number is 2487. It was purchased used back in the 1960s, so it is old and Dearborn is out of business.

I live in central South Carolina and would appreciate any help you may give me in finding replacement disc.

Thank you,

Herb

 

[Wagtail]

G'day Mate and welcome to TBN from Downunder.

Enjoy the site.

 

[Thomas]

:welcome: to TBN...enjoy.

 

[Herb46]

:welcome: to TBN...enjoy.

Thank you!

 

[Herb46]

Thank you!

 

[shovelmike]

Welcome to TBN. I don't see those disc plows very often, mostly used for Rocky ground that would be difficult with e moldboard. You must have a lot of rock to damage it quickly.
There is one on Craigslist currently for $300, I only paid $100 for my moldboard plow some 30 or so years ago.
Would replacement discs for a disc harrow fit?

 

[Herb46]

Welcome to TBN. I don't see those disc plows very often, mostly used for Rocky ground that would be difficult with e moldboard. You must have a lot of rock to damage it quickly.
There is one on Craigslist currently for $300, I only paid $100 for my moldboard plow some 30 or so years ago.
Would replacement discs for a disc harrow fit?

Thank you Shovelmike for the welcome. I am not sure about the disc harrow. I am looking at all options and with a friend's help, we may just have to modify one. What we did, since I was a teenager, we let the plow set out in the weather and yes, I do have a lot of rocks.

Thank you,

Herb

 

[MF2604h]

Welcome to TBN

I知 in Lexington County, probably not far from you.

 

[Herb46]

No, you are not too far from me. I live off highway 321 just before you get into Fairfield County and thanks for the welcome. I traded my Massey in for a Kubota about five years ago. I got a better deal on a from Kubota that I did at the Massey dealer close to me. The Massey was a good tractor.


Herb

 

[TBN Support]

Welcome to the forum!

:tractor: I'm going to move this thread over to our attachments section.