Hesston Tractors

[Dead Horse]

Who has one? I know JayDavis has a 90 90 DT and I have a 100 90 DT.

I wonder who else has one.

here is are a few pictures of mine.

 

[JayDavis]

I have one, a 90-90DT as Dead Horse said. I think it is an 86 model. Not too sure on that. The first two pictures were taken before I found where my grandfather hid the front and side panels for the engine compartment.

The last picture is of another Hesston I stumbled upon on one of my motorcycle rides. Saw it in a hay field so thought I'd ride up and take a pic. It has obviously had a hard life. Seems to be a 100-90 as well.

 

[matt21]

How are those tractors on fuel? I've seen a few for sale in my area for what sounded to me like a decent price. How about for reliability?

 

[Dead Horse]

I work mine pretty hard for a weekender. Mowing all summer long, logging for firewood late summer, fall and winter as well as snow removal all winter.

For what it gets done it is cheap to run. It has been very reliable. Has 2350 hours on it and I have replaced a waterpump and an alternator.

I am very happy with it.

I bought a used Farmi 601 and have been logging with it the last two weekends. I it is a perfect match for the tractor.

 

[radman1]

Haven't seen a Hesston tractor for years in my area. Saw a few in the 80's when Hesston stackers, and hay machinery was at its peak in popularity. Where do you go for parts?

 

[Dead Horse]

New Holland dealers have the number cross references.......... it can be a challenge. There are a couple places in Canada that have New Old Stock available.

 

[slowzuki]

Don't know about down south but they were also sold as Fiat's here.

 

[Renze]

Don't know about down south but they were also sold as Fiat's here.

90-90 and 100-90 are Fiat type designations... The Fiat Winner series was their successor i believe, and the NH TM series has some Winner DNA in it, i've heard.. I'm not 100% sure about this.

But anyways, parts are available, it just may take some time to send them overseas.

 

[Dead Horse]

Yes, FiatAgri is the name under Hesston, on my particular unit. In North America, we can get an aweful lot of parts, almost anything that would be needed from vendors in Canada.

I got a water pump from a place in Vermont, and I had my alternator rebuilt by NAPA. Otherwise the tractor has held up well, knock on wood.

 

[Renze]

You can see in the picture that the front axle under the 100-90 is the same as under the New Holland TM series.

 

[Dead Horse]

Interesting, but I do not expect to have to replace a front axel......... I wish the other things needed were more easily sourced.

 

[Ben Gone]

I have a Hesston 80 66. Has been a very good tractor so for. Almost 5000 hrs on it. Use it mostly for pulling round hay baler.

 

[fiat980]

i have a 100-90dt in manitoba

 

[fiat980]

I have one, a 90-90DT as Dead Horse said. I think it is an 86 model. Not too sure on that. The first two pictures were taken before I found where my grandfather hid the front and side panels for the engine compartment.

The last picture is of another Hesston I stumbled upon on one of my motorcycle rides. Saw it in a hay field so thought I'd ride up and take a pic. It has obviously had a hard life. Seems to be a 100-90 as well.

are you going to sell it?

 

[D7E]

Always fancied one of these 110-90 turbo's in ford colours..!

 

[banjodunn]

G'day your hesstons over there were sold as fiat over here parts are available through the new holland network or also vapourmatic if you have suppliers over there, as far as reliability goes i have seen several machines exceed 10,000 hrs without a prob engines seem to go on forever likewise the trans the worst thing is the cabs are prone to rust. If you look hard at the early new hollands and the last of the fords they are a fiat painted blue you can still see fiat ideas in some of the late model rear ends. All in all a good machine economical and long life suprised they did not sell more


Jon

 

[fiat980]

Haven't seen a Hesston tractor for years in my area. Saw a few in the 80's when Hesston stackers, and hay machinery was at its peak in popularity. Where do you go for parts?

hey where do you live?

 

[fiat980]

where do you live?

 

[Dead Horse]

Raised this thread from the dead............. My tractor has prox 3,000 hours on it and the clutch just gave up the ghost. Looking at TractorJoe in MN for parts........... splitting this thing is going to be a real treat!

 

[powerscol]

Careful - there have been some bad reports on getting correct parts from them in a recent post somewhere here (TBN). I tried getting filter information form them (Kioti/Bobcat cross over) but they were too busy to look up what I wanted and never called back. My Bobcat dealer dropped their prices for me and others to match (10% or more if possible). Do a search on their name for yourself on the recent issues. Something about counter-fit filters if I remember correctly - I could be wrong.