Funny I'm picturing Portugal as a warm country, I'll have to go back to the maps again. l can get my shop 60* FH on a 0* day, I can also cool it down real quick when I open the OH door. You must have a shop with no heat? Any special color picked for fork attachment or basic black? The pallets falling over place story is a much better story...................
Homemade loader for Branson tractor
- Thread starter ptsg
- Start date
- Views: 40748
-
- Tags
- branson homemade loader loader
OP
ptsg
Super Member
Actually, so far this hasn't been a cold winter. The lowest we had so far was around 43F but we have had lots of rain recently. Two storms passed by us with loads of rain, leaving a couple of rivers completely flooding and also everything is with high humidity.
My shop doesn't have nor isolation nor heat. We might be adding a stove soon though. At least it will help take all the moisture from the walls.
Usually on the winter we can go as low as 32F with the occasional 30F every once in a while. At least in my particular area. There is a high mountain, northeast from me, that will actually get some sort of snow.
As far as paint color, I don't know really. I'm learning towards Orange, like Kubota orange, because the carry all box is that color and I would just get everything done on one go. I do want another colour other than red and dark grey.
My shop doesn't have nor isolation nor heat. We might be adding a stove soon though. At least it will help take all the moisture from the walls.
Usually on the winter we can go as low as 32F with the occasional 30F every once in a while. At least in my particular area. There is a high mountain, northeast from me, that will actually get some sort of snow.
As far as paint color, I don't know really. I'm learning towards Orange, like Kubota orange, because the carry all box is that color and I would just get everything done on one go. I do want another colour other than red and dark grey.
I have high humidity 3 months out of the year, dont I hate it. So you never been below 0-F, you dont know what your missing, you can freeze water real quick in that, your fingers and feet get cold to..........
One thing about orange the color sticks out but does it go with red. I very rarely use black now, for me it's harder to see holes, pins, bolts and tool placement, my tool chest use to be black now it's yellow so when I set something in it I can see it without glasses.
One thing about orange the color sticks out but does it go with red. I very rarely use black now, for me it's harder to see holes, pins, bolts and tool placement, my tool chest use to be black now it's yellow so when I set something in it I can see it without glasses.
OP
ptsg
Super Member
Never been below 0F but had Russian friends that were below 0-F and they said that the cold here is much worse than the cold in Russia. I do live about 8 miles from the Atlantic Sea.
I'm probably going with orange, since the forks and the forklift are both orange, although I'm liking the idea of the yellow since you mentioned it.
I'm probably going with orange, since the forks and the forklift are both orange, although I'm liking the idea of the yellow since you mentioned it.
Uh-oh it's starting already and it only gets worse 50 years from now. But hey nothing wrong that choice, I personally like yellow and I'd paint your carry box on back the same to.
I mention my tool chest is yellow, so now my son just gave me another one for Christmas that's high gloss white, nice but when I put them side by side in the shop, I have to admit I like the yellow one better, maybe I like yellow better then I thought I did, but least it's not black, funny how age changes color favorites.
Least you pallot lift didn't end like this, what way to start the day>>> Forklift Driver Causes an Entire Warehouse to Fall like Dominoes - YouTube
npalen
Elite Member
What is the yellow hydraulic motor for on the front?
