Re: How do you adjust a hydraulic valve? *DELETED*
OK.. here is the skinny.... it appears that this is the correct way to set the auxiliary valve if you want to use just two hoses. I have it on good authority from the Central Division Kubota Technical Representative that this is the way that some dealers would plumb it and that it is perfectly acceptable method if you don't need full hydraulic pressure to the cylinder.
Having said all that, I have also figured out a way to use the power beyond to power this valve and to plumb it with the three lines so it will be fully functional with full pressure to the cylinder.
Now getting to the next topic.... the valve. Yes, I am beginning to realize that you are having second thoughts about taking me into you family with the impending marriage of your old maid daughter and the proposition that you suggest that you would make it financially worthwhile for me to consider the union. I also am having second thoughts since you seem to be reneging on most if not all the promises that you have made. I know that there are going to be a lot of TBN members that are going to be very disappointed to not be able to attend the festive event that you had planned for your pole barn.
Getting back to the valve........ the basic engineering is completed and not it is onto the prototype steel modification work. Unfortunately, my pole barn is late in getting started, so I am still working out in the cold. You wouldn't happen to know where the deposit check is in the mail, would you????? /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
OK.. here is the skinny.... it appears that this is the correct way to set the auxiliary valve if you want to use just two hoses. I have it on good authority from the Central Division Kubota Technical Representative that this is the way that some dealers would plumb it and that it is perfectly acceptable method if you don't need full hydraulic pressure to the cylinder.
Having said all that, I have also figured out a way to use the power beyond to power this valve and to plumb it with the three lines so it will be fully functional with full pressure to the cylinder.
Now getting to the next topic.... the valve. Yes, I am beginning to realize that you are having second thoughts about taking me into you family with the impending marriage of your old maid daughter and the proposition that you suggest that you would make it financially worthwhile for me to consider the union. I also am having second thoughts since you seem to be reneging on most if not all the promises that you have made. I know that there are going to be a lot of TBN members that are going to be very disappointed to not be able to attend the festive event that you had planned for your pole barn.
Getting back to the valve........ the basic engineering is completed and not it is onto the prototype steel modification work. Unfortunately, my pole barn is late in getting started, so I am still working out in the cold. You wouldn't happen to know where the deposit check is in the mail, would you????? /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
