How to wire a Bobcat stump grinder SG60 to work on an ASV Rc100???

tuckinlugz · Dec 7, 2009

Thanks everyone for your help. I think today finally after a couple weeks of time and research I figured it out. Thanks Dennis from Wisconsin was the guy with the knowledge! Bobcat makes an adaptor that goes from the attachment and converts to a 14 pin connector. For my Stump grinder the SG60 it's part number 6725383 $292.83 and for the snow blower (not sure which model) it's part number 6728165 $194.77. And then you plug the 14 pin adaptor into another adapter that will plug into the Cat Asv 8 pin plug. It's part number 714648 $230. So I thought I would post it up and the next one of you that needs the info won't have to waste all the time I did trying to figure it out. My local Bobcat dealer was clueless. Bobcat of Green Bay knows their stuff! Merry Christmas!

skidsteer.ca · Dec 7, 2009

tuckinlugz said:
Thanks everyone for your help. I think today finally after a couple weeks of time and research I figured it out. Thanks Dennis from Wisconsin was the guy with the knowledge! Bobcat makes an adaptor that goes from the attachment and converts to a 14 pin connector. For my Stump grinder the SG60 it's part number 6725383 $292.83 and for the snow blower (not sure which model) it's part number 6728165 $194.77. And then you plug the 14 pin adaptor into another adapter that will plug into the Cat Asv 8 pin plug. It's part number 714648 $230. So I thought I would post it up and the next one of you that needs the info won't have to waste all the time I did trying to figure it out. My local Bobcat dealer was clueless. Bobcat of Green Bay knows their stuff! Merry Christmas!

Good to here there is a "proper" way to do this. Hope it works well for you.
Ken

tuckinlugz · Jun 25, 2011

I wanted to follow up on this thread, I couldn't find it the last time I looked.

The wiring harness I bought all plugged in, but did not work. Evidently the CAT machines have a secondary switch on the controllers, which I thought I had, but it was a horn button.

I believe these adaptors would work on a Cat machine, but not the ASV.

I ended up wiring my harness directly to the solenoid switches on the stump grinder and it worked. I had to add one additional switch for the 3rd cylinder.