Eric Kelley
New member
- Joined
- Apr 29, 2010
- Messages
- 3
I have acquired an old Howard Rotavator Machine NO. EM27359. It is a great machine but I have broken a tine and need replacement. I would like to buy several if possible. Can anybody help me?
Howard Rotavator Tines
- Thread starter Eric Kelley
- Start date
- Views: 9876
art
Super Member
That number must be the serial number not the model number! Take a good look at what tines are on the machine as there are several styles.
howardrotavator
New member
The machine is an E Series 2. Contact me at howardrotavtor2007@yahoo.com or phone 815-765-9505 for more information Markings on the tines will identify the blade part number.
Dieselfixer
New member
Hi. Would you happen to have some sort of diagram or something to tell me the order of the tine installation on a HR30-155WU tiller? My helper took all of the tines off and don't remember how they was on there. Thanks!
HayDR
Veteran Member, Approved Advertiser
Tillermaxx.com has the tines
Egon
Epic Contributor
Take a tine to a Farm Supply store for measurement. They should be able to order some.
Sawyer Rob
Super Member
If you are going to run it a lot, in tough conditions, I'd be buying genuine Howard tines, the cheaper tines just don't last as long.
SR
SR
HayDR
Veteran Member, Approved Advertiser
Our tines are Boron steel from Spain and Italy. Howard does not have a distributor left in the USA.
Sawyer Rob
Super Member
That's odd, the Howard dealer that I get my tines from, is still getting Howard tines from some place ? but I have no idea where...
Kongslide owns Howard, maybe they come through them?
SR
Kongslide owns Howard, maybe they come through them?
SR