Whatswrong
Gold Member
I have been envisioning building a press for a long time .What have any of you built as far as presses go .Can you share some pictures.
Hydraulic Press
- Thread starter Whatswrong
- Start date
- Views: 12410
Sfrankland
Silver Member
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 7,047
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Built this one 30 years ago.
Terry
Terry
Billrog
Veteran Member
- Joined
- Dec 9, 2014
- Messages
- 2,057
- Location
- Armstrong, British Columbia
- Tractor
- Kioti 2610, 580 SuperM Case Backhoe
I have a 20 ton, I bought delivered to my shop 20 years ago for $120 that looks similar to the pic. Sfrankland
posted. I was considering making one until I got the flyer with a price for less that I could buy the jack.
posted. I was considering making one until I got the flyer with a price for less that I could buy the jack.
downsizingnow48
Elite Member
That looks like a real industrial powerhouse. Deserves a write up in the "tools I built" thread!
Deezl Smoke
Silver Member
I made this one about 25 years ago. I wanted a welded tubular beam to prevent flexing and storing energy when pressing tough projects. I have a 20 ton jack in it till it blew up, now have a 12 ton. Beams work awesome at preventing energy storage. Also made a few attachments for it over the yeats including this smaller bar bender. As you can see it's been abused pretty bad over the years. Probably time to make a new one.
jmc
Elite Member
- Joined
- Jul 21, 2003
- Messages
- 3,187
- Location
- SW Indiana
- Tractor
- Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST
I like that you can pull things apart with it too. (from the looks of it.)
jmc
Elite Member
- Joined
- Jul 21, 2003
- Messages
- 3,187
- Location
- SW Indiana
- Tractor
- Ford 1920 4x4 (traded in on Kubota). Case 480F TLB w/4 in 1 bucket, 4x4. Gehl CTL60 tracked loader, Kubota L4330 GST
I wanted a welded tubular beam to prevent flexing and storing energy when pressing tough projects......Beams work awesome at preventing energy storage.
This is an excellent point about structures. Just because something doesn't permanently bend at full capacity doesn't mean it's a good design.
Buty
Silver Member
I second the HF route. 20 ton for less than I could build one. Always on sale as the coupons are everywhere.
Similar threads
