hydraulics dont pick up

[Soundguy]

if diesel eats the seal.. it needed replacing. seals should be petroleum proof.. oil is petro based.

I like to flush 'wet' sumps with a mix of diesel, some atf, and 91% rubbing alcohol.

soundguy

 

[whodat526]

have u tryied adjusting the flow control on the side of the rear axle i have seen them get screwed in or all the way out which does allow the oil to flow at the right rate

 

[houston burt]

havent tried the flow control where would be located. putting it that way with the diesel makes sense about the seals may try that when i can get back down there thanks for yalls input hope on day can return the favor will keep posted

 

[whodat526]

the flow control valve should be on the rear axle housing on the right side by the heel of your foot

 

[houston burt]

I will check it out for sure