If you have Toolcat questions, ask them here...

[Gryfin]

My understanding is that the lower glass is not an option. It was simply there before and now it's not. The online configuration tool as well as the dealers software show no way to configure lower glass. I guess folks were having lots of breakage issues?

From the online parts catalog, the 2 doors seem to be identical other than the lower glass, so in theory you could buy doors from an earlier Series G with the lower glass and replace your new doors if it were a must have. Can imagine that 2 new TC doors would be expensive though...

My TC has the lower glass and I'm glad it does as it offers better vision. I could get by without it, but I'm use to a open work station, so I like to see as much as I can. Sure, I could get by with no lower windows, why? I'm wondering why they offered them without windows. Maybe during forestry work or around animals?

 

[Xfaxman]

Re: Lower Door Glass

Hey guys, I am in the market for a new Toolcat and I've noticed (by browsing bobcatpartsonline) that on newer units after a certain serial #, there is no more lower glass in the doors. Is that glass a problem child with breaks? It seems like having that lower glass could be very useful for seeing the ground. For those of you that have the lower glass, would you miss it if it were gone? Of course my dealer has no idea as apparently they don't sell many down here in the south.

-------------------------------

Thanks!!

Not a problem as far as I know. At least I haven't broke one.

I also could get by without them, since I don't recall using either one.

This is our 2017 5610 G Series with the lower glass:

 

[Gryfin]

Re: Lower Door Glass

Well, after years of lurking around reading about toolcats, I finally have one in my barn! After I checked out a new model with no lower door glass, I realized that I preferred the lower windows and was able to find a new 2018 5600 that had a few demo hours on it. Dealer made me a good offer and I took delivery this week! Thanks to everyone on this forum for taking the time to post about your machines. You all just cost me a lot of money.....

 

[DEWFPO]

Re: Lower Door Glass

Congrats!


DEWFPO

 

[Xfaxman]

Yep, congratulations. Now you need a grapple and a mower for it!

 

[ruffdog]

Re: Lower Door Glass

Well, after years of lurking around reading about toolcats, I finally have one in my barn! After I checked out a new model with no lower door glass, I realized that I preferred the lower windows and was able to find a new 2018 5600 that had a few demo hours on it. Dealer made me a good offer and I took delivery this week! Thanks to everyone on this forum for taking the time to post about your machines. You all just cost me a lot of money.....

View attachment 608076

Looks great. It looks like it is loaded up with options too.

 

[Gryfin]

90 inch bobcat finish mower has already been ordered! I have a 72inch cutter already as well as a grapple that I ran on my CTL. I'm afraid it's going to be too heavy at nearly 1000 lbs to run regularly, so I may be picking up a lighter weight one in the future

 

[Gryfin]

Looks great. It looks like it is loaded up with options too.

Just needs some hours on it! Which it will get in short order (as soon as my mower arrives)!

 

[Dakota Kid]

Code 50-07 FPR No signal

 

[Xfaxman]

Code 50-07 FPR No signal

Since nobody responded, looks like you need to start a new thread with the error code in the title and more information.

If you don't know what series it is, post the first 4 digits of the serial number.