Implement falling off SSQA

   / Implement falling off SSQA #1  

6sunset6

Veteran Member
Joined
May 6, 2007
Messages
1,055
Location
SE NY
Tractor
NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's
My tractor NH TC34DA is 10 years old . It was new and came with a NH SSQA. The last couple of years when I roll the bucket all the way forward it fell off sometimes. I roll it that way because I have a grab arm that closes over the bucket. If I want to grab something big I have to roll the bucket so the grab arm closes around the object against the bucket. I though the pins on the SSQA were getting worn so I added some material by welding. Did not seem to help much. Anybody else have this problem? I could buy new pins they are around $40 each. But if it does not fix it I will not be happy. I never liked that SSQA . I like the ATI ones . I had one of those on another tractor. Any thoughts ?
 
   / Implement falling off SSQA #2  
How tight of fit are the pins fitting in the bucket.
To tight the pins can't go down all the way, to loose and the pins can be pushed up/out.
If set/working correctly the bucket on a SSQA will not come off.
 
   / Implement falling off SSQA
  • Thread Starter
#4  
thanks read thru the whole thing. I was thinking of new pins. I think they could be an inch longer and still lift clear.
 
   / Implement falling off SSQA
  • Thread Starter
#5  
thanks read thru the whole thing. I was thinking of new pins. I think they could be an inch longer and still lift clear.

I got new pins new PN replaced old no. An inch longer . I would guess I was not the only one with the problem.
 
 

Tractor & Equipment Auctions

2022 Down2Earth 82in x 36ft Two-Car Hauler (A51039)
2022 Down2Earth...
2017 JOHN DEERE 6120M TRACTOR (A51406)
2017 JOHN DEERE...
GORMAN RUPP 4 TRANSFER PUMP (A50854)
GORMAN RUPP 4...
Peterbilt 377 Semi-Truck (A51039)
Peterbilt 377...
(INOP) CATERPILLAR 259D SKID STEER (A50459)
(INOP) CATERPILLAR...
Handlair 555 Grain Vac (A50514)
Handlair 555 Grain...
 
Top