Implement Sizing

[s219]

The dealer doesn't have either the 54 or 60 inch box blade in, so he'd have to order in either size.

Not looking to buy both a blade and a box blade, just simply looking at what the manual says and what the dealer suggested.

Tractor is at the farm about 3 hours away , so I don't have an actual width measure. I'm thinking it's about 49 inches or so.

Part of what I need to deal with is the lane way. It's an old school lane with two gravel tracks and grass down the middle, and also some re-sloping of part of the yard behind the garage before I have some new fence put in.

My B2920 (same size) was 49" to the outside of the tires with R4 industrial tires.

 

[Will_C]

My B2620 is 50" wide with turf tires. No experience with a box blade, but I use a 5' back blade for driveway grading and snow removal, and could easily use a 6' blade.

Will

 

[erda]

So, the tread width with the R4 tyres is 49"; the carcus of the tyres extend a bit further out, to 50 1/4 inches.