Iseki Forum

[Wacky]

Me too!:thumbsup: More information on my equipment, oh yeah:drool:

 

[DennisArrow]

guys......this IS the Iseki Forum of which they speak. If you look at the original post #1 it was started back in Jan. of '03 before this forum came into existence.... Somehow this old thread / public poll was bumped back into the present... So ask all your Iseki questions in this forum and there's lots of us to try and get you answers.

Bill

Bill.........RIGHT......I think the problem is that folks are so excited by their new seats that that part of the anatomy takes over and a failure to read kicks in............Dennis

 

[chiefcook]

I have a Bolens 2102 that I purchased new about 25 years ago. I keep 3 1/2 acres mowed with a rotary cutter and 450 ft driveway maintained with a 5 ft box blade. I do all my own maintenance and this forum has helped me thru the years. It also helped that I bought the bolens shop and part manuals with it.

 

[buddymay]

Count me in!

 

[Rollo13]

Count me in!

 

[pchearn]

Hi. I'm new to this forum. I own an Iseki TL2300. I've had it for several years. I don't really know anything about repairing it. I've changed the oil, but that's about it. I had it repaired a couple of times (nothing serious) where I bought it, but they no longer repair Iseki tractors. I have a frontend loader on it and it's not working right. I decided to check the hydraulic fluid, and discovered that I don't even know where to check it. There's a dipstick and a filler cap on the thing the gear shifter is on, but I don't know if that is hydraulic fluid or something else. Whatever it is, the dipstick shows it is very, very low. Can anyone point me in the right direction with this frontend loader problem? If this question needs to be listed in the Parts/Repairs forum, please let me know. Thanks in advance.

 

[xmariner]

Here, here - Late entry! I own a TU150FD with FEL and a few implements. Great little tractor.

 

[ki0ho]

I have a MF- 1532 whitch is made by Iseki I have been trying to find out what the Iseki mod number is but havent yet. Also trying to find a cross ref on the hydrolic suction filter the Massey part is real high cost . Hope this thread goes well for all Jerry:thumbsup:

 

[Kays Supply]

The 1531 uses a WIX 1268 hyd filter. The 1532 wasn't listed.

 

[Rustdust]

Landhope 155 here.

 

[yomax4]

TA247, ROPS, FEL, Blade, Forks, 5' Dixie Cutter, Log Skid Cables. Great Little Work Horse. Only complaint is a Box full of knobs and switches next to the seat for 3 point control that I can't figure out. Box may be haunted.

 

[Rod in Forfar]

I have just bought a 1981 Bolens G174 and I definitely could use some advice. It's a great little tractor and is currently crowding the two larger machines because of its handiness at mowing around my 15,000 little trees.

I would like to know: 1) if it has enough hydraulic output to run a block splitter and 2) if there is a simple way to mount a load-distributing hitch for hauling trailers around without the constant risk of rearing on hills -- quite an unpleasant experience.

So yes, an Iseki forum would be a great idea.

Rod in Forfar

 

[Rod in Forfar]

Muhammed, we almost own a G192 that we don't know how to start or figure out where the oil dipstick is. So please, have a forum!

Liz

If it's anything like a G174, the "dipstick" is a plastic thingie you grip and twist out on threads. There's a stick attached to the bottom of it. Where? Right behind and almost under the oil filter.

 

[larso1]

This IS the Iseki Forum. If you look at the first post it was several years ago. The Iseki Forum is this one and it has been in place for several years. Not sure how or why this thread got dragged out of the past and into the present.

 

[Slick Willy]

Love the forum. It gives us a place to come for support in areas that we're not all expert in. Thanks for setting it up and running it !!

 

[Slick Willy]

Love the forum. Its a good source of info. Thanks for setting it up and running it.

 

[BuddyA]

Have an iseki tu1900f and really need parts info. so bring on this forum.

 

[schoolsout]

I voted for the forum. I didn't say anything here, but I have been talking on the gray forum about Iseki. I have a MF 1250 which is a TK532. A Iseki forum would benefit me with my MF. A dedicated forum would attract more information and more poster about that brand. I know for one, that would benefit me and my MF.

Ditto
Our MF 1533 is Iseki

 

[Boz1]

Iseki forum please. Boz1 in New Mexico. Makes communication much easier.

 

[Ivan49]

Iseki forum please. Boz1 in New Mexico. Makes communication much easier.

You may want to check the date this was started and the date on the post above yours