It's finally here!

Beezz27 · Mar 21, 2014

k0ua said:
No, mine move freely. Did you lube it up?

It had SOME grease on it but, I plan on cleaning the pins(gravel dust from the dealership) and re-lubing it tonight.

Beezz27 · Mar 21, 2014

grsthegreat said:
mine is hard to unlatch, but moves freely after its released. sometimes too freely, as it tends to flip down to semi latch as im driving tractor over to other implement. once latched its very tight.

and keep checking the bolt that secures the quick release lever, cause it does tend to get loose at times. Mine actually fell off one time. Luckily i was able to find all the parts. Since that happened i made up a spare set to keep in tool box in case i lose the part while operating and cant locate the parts.

I will check that bolt thanks!

murphy1244 · Mar 21, 2014

Congrats! Check the FEL mounting hardware and wheel bolts for proper torque!

k0ua · Mar 21, 2014

murphy1244 said:
Congrats! Check the FEL mounting hardware and wheel bolts for proper torque!

I did that again yesterday during the greasing routine.:thumbsup:

murphy1244 · Mar 21, 2014

k0ua said:
I did that again yesterday during the greasing routine.:thumbsup:

I'm waiting for my new Grease coupler before I get into all that.

davrow · Mar 21, 2014

Beezz27 said:
...I took delivery last night of my new work horse. DK 40 SE hst, 6 ft box, grapple bucket.

Congratulations! Looks great. Love that grapple.

deerseeker001 · Mar 21, 2014

looking good enjoy

KiotiJason · Mar 21, 2014

k0ua said:
I did that again yesterday during the greasing routine.:thumbsup:

Congratulations on the new tractor, feels like being a kid again for a bit. I was surprised on how loose the loader bolts where, not all but some after about 5 hours. Once I nipped them up I used a permanent marker and put a line in the thread and nut. Now all I do is just a visual check before I fire the tractor up.
Congrats again