Can any one help with a reverse issue on a 3320 hydro error 14? I have read a few forums with a few others with the same issue but know mentioned of what the repair was. Currently I have checked voltage at the foot pedals both forward and reverse are the same 1 volt to 4 volts at full travel. I...
www.tractorbynet.com
/ JD 3320 suddenly will not move. Throws an error code 14. Solonoid coil insufficient. Bought a new coil but can’t find where the solonoid is located!
I went to the JohnDeere dealer and spoke to a helpful parts manager who printed off numerous tech pages for me. The reason I couldn’t find the solenoid is because it is in the center case of the transmission. I will write more after I continue working with the tech sheets.
/ JD 3320 suddenly will not move. Throws an error code 14. Solonoid coil insufficient. Bought a new coil but can’t find where the solonoid is located!
The solonoid in question is not for the starter. The engine runs fine. The solenoid controlling hydraulic fluid flow to the hydrostatic transmission can not be seen located either in the center case of the transmission housing or above it .