JD 4110 FEL problem

   / JD 4110 FEL problem #1  

bell1

New member
Joined
Apr 27, 2010
Messages
3
Hello. I have a JD 4110 with a 410 FEL. The loader lifts fine and curls down fine. But it will only curl up about half-way and then stops. I haven't found any leaks/broken hoses. Any ideas? Could it be a cylinder?

It was working fine one day and the next day didn't curl up all the way.
 
   / JD 4110 FEL problem #2  
There was a similar problem on here in the past few weeks. Ended up that quick disconnects needed to be unhooked and rehooked. Its cheap and always worth a try!
 
   / JD 4110 FEL problem
  • Thread Starter
#3  
Just found that after I posted this. I will try that. Thanks.
 
   / JD 4110 FEL problem #4  
Welcome to TBN:D

As suggested, unplug and re-seat all the QD's...75% of the time that fixes the problem. Good luck.

BTW...You have a great machine there, not that I am biased or anything:p
 
   / JD 4110 FEL problem
  • Thread Starter
#5  
It works! Must have disconnected one somehow. Thanks again everyone!

Kennyd - yes, it is a fantastic machine. I love it!
 

Tractor & Equipment Auctions

Air-Care Decontamination Turbojet (A49251)
Air-Care...
120in Fork Extensions (A49346)
120in Fork...
8ft QA Snow Pusher (A49251)
8ft QA Snow Pusher...
2008 Isuzu NPR-HD Landscape Dump Truck (A46683)
2008 Isuzu NPR-HD...
2016 ISUZU NPR 16FT BOX TRUCK (A45679)
2016 ISUZU NPR...
Rut MFG SS-BC-78-XP Hydraulic Front Skid Steer Brush Mower (A49339)
Rut MFG...
 
Top