JD 5525

Ag Tech · May 21, 2009

I'm having some issues with my 5525 John Deere. Just finished repairing some damaged wiring to the taillights, and now the tractor does not go anywhere when gear is enagaged. Any help would be great, thank you.

Ken Cunningham · May 21, 2009

Check your range selector lever to see if it is in gear.

Ag Tech · May 21, 2009

Ken Cunningham said:
Check your range selector lever to see if it is in gear.

Yup, everything is in nuetral. I guess the newer JD's have a cam bus diag plug. You have to have software or some type of scanner to pull the code. The tach, and gauges do not work on the dash, but all the idiot lights come on pre-start up.

Ken Cunningham · May 22, 2009

OK, maybe im confused here, but I thought the problem was that the tractor wouldnt move. This is a gear drive tractor isnt it?

RWolf · May 22, 2009

Does it start? Can you shift into gear? HST or gear? Confused also.

Ag Tech · May 25, 2009

Yea, goes into gear but does not go anywhere. I checked to see if there was any power coming out of the ECM to the trans selinoids, no power. The forward and reverse handle has power. Some of the dash stuff fails to work also. I'm thinking the ECM is fired. It has a code 02 and 03.