JD 7810 with Krone baler

   / JD 7810 with Krone baler #1  

dgl24087

Veteran Member
Joined
May 6, 2004
Messages
1,521
Location
Va/WV
Tractor
1975 John Deere 1530
Saw this combo sitting in front of dealership when I went to check on my new S240.
IMG_20220715_183138306_MP.jpg
IMG_20220715_183047373_MP.jpg
 
   / JD 7810 with Krone baler
  • Thread Starter
#2  
The baler weighs 25000 lbs, makes a 4 ft by 3 ft square bale and requires 250 hp to operate. The 7810 hooked to it is on the dealer lot and was the only tractor they had that would pull it off the trailer used to transport the baler from the farm.
 
   / JD 7810 with Krone baler #3  
Much more than that.
My Big Pack 4x4 weighs 34,000lbs.

You’d want an 8000 series Deere just to keep that thing under control. Not so much a HP thing as a weight thing. You want a 25,000lb tractor to feel like the Krone baler isnt throwing you around.

Im running 300HP in front of mine in my MX-270 and its fine, but I wouldn’t want to run under 250PTO unless flat ground. Its also a really heavy tractor.

1658190223382.jpeg



Heck my Hesston 4910 is close to 24,000 with 2 biscuits in the chute.

1658190435998.jpeg
 
   / JD 7810 with Krone baler #4  
Good post for the TBN JD AG tractor forum ?? Maybe the admins will relocate this thread.
Takes a lot of big equipment to lay out the hay crop to feed this beast. Big stuff for Big farms.
 

Marketplace Items

2019 GALYEAN EQUIPMENT CO. 150BBL STEEL (A58214)
2019 GALYEAN...
2021 Cat 259D3 (A53317)
2021 Cat 259D3...
2020 DRAGON ESP 150BBL ALUMINUM (A58214)
2020 DRAGON ESP...
2423 (A60432)
2423 (A60432)
VOLVO A40D OFF ROAD DUMP TRUCK (A60429)
VOLVO A40D OFF...
30KW GENERATOR (A58214)
30KW GENERATOR...
 
Top