JD Owning/Operating FAQ (Please Help)

[rockyridgefarm]

Deere CUT Glowplug starting

FEL Float


/forums/images/graemlins/confused.gifJack Shaft lever /forums/images/graemlins/confused.gif

 

[rockyridgefarm]

How to 'tweak' a Loader

How to 'Un-tweak' a loader...

Hose Swapping for Dummies

 

[rockyridgefarm]

Here is a start on online owners manuals at Deere.com There are more. If more than one shows up; there are different versions posted. Make sure that the serial numbers match your equipment!

I still can't track down the 447-448 backhoes...

2520
2520
3000TWENTY
3000TWENTY

4000TWENTY
4000TWENTY
4000TWENTY

110TLB
110
110TLB

4010
4010

4110-4115

4210-4310-4410

4510-4610-4710
4510-4610-4710

3203
2305
2305
2305

790
790
990
990
2210
2210
2210

4100

4200-4300-4400

4500-4600-4700

200Loaders
300Loaders
400Loaders

419Loader
430-460 Loaders
47-48-49 Backhoe

 

[rockyridgefarm]

Oops! I searched TBN and found out that I already moaned about not having the 448 manual, and turns out fastpat sent me a copy already. I will see if I can get it online...

In the meantime, I can email it if anyone needs a pdf...

 

[rockyridgefarm]

When installing a JD Backhoe, the rockshaft has to raise far enough to instert the mounting pins. Adjusting the rockshaft height limiter is the correct solution:

How to adjust rockshaft height

 

[rockyridgefarm]

2320 Owner's Manual

 

[rockyridgefarm]

400CX Self Leveling Loader Info

 

[JD3520]

Here is a shortcut to many JD amnuals. The problem is finding the one you want because they are listed by part number. If you can find the part number for your manual than you can get it here.

PULL UP THE FOLLOWING ADDRESS:

http://manuals.deere.com/cceomview/

STEP 1: LEFT CLICK THE PART NUMBER FOR YOUR MANUAL
STEP 2: LEFT CLICK "OUTPUT"
STEP 3: LEFT CLICK "INDEX"

THIS WILL BRING UP THE OWNER'S MANUAL
http://manuals.deere.com/cceomview/

CHUCK

 

[rockyridgefarm]

OK, so maybe I was keepin' that under my green cap....

 

[rockyridgefarm]

The FAQ is getting a fair number of reads... I know that i have used it quite a few times already to find info. I had a issue with my machine the other day, and found the answer within seconds right here!

If anyone knows of a useful thread or link don't be shy step right up and post it!!!

I think at some point Muhammad&Co. will clean this up...