john deere 3520 delux cab tractor arrived. pics and video

[AKfish]

Congratulations! Sweet lookin' rig! :thumbsup: Does it have the 3rd function SCV for the loader? As Martian mentioned - looks like the 3rd function rocker switch is on the loader joystick.

AKfish

 

[s219]

I haven't ever seen one with a cab -- that is quite sweet. I'd be afraid to get in there with dirty boots! Seriously, that is nicer than some trucks.

 

[jenkinsph]

That is a very nice ride.:thumbsup:
Getting the optional hydraulics to start with was a good choice too.

 

[Martian]

yeah martian is right. i have never had a problem with visibility personally. i just prefer the stack. I dont like to sound full of it but I worked mass excavation for years with way worse visibility running twin engine pans d6 and d8 dozers etc. So this stack wont be in the way for me with a loader at all. Martian i got a price of 4000 with my 18 percent discount for 300x and something like 700 more for cx. i think ill go with cx. Just cant see skimping out on the loader. I actually just came in from taking it for a ride down the road with all the lights on. Fun stuff haha

Good deal. And the 300CX will be on and off in 2-3 minutes so you can still have the versatility mowing.

And it sounds like we had the same fun, Thursday night at 1030 I realized it was garbage day Friday so I fired up the 110 and took the garbage down to the end of the drive and took it around the block with the lights on.:thumbsup:

 

[CompactTractorFan]

Congrats on the tractor!!!

Thanks for the pics and video. :thumbsup:

 

[murphy1244]

Congrats onthe machine. ahhh air conditioning while cutting the back 40 with tunes. can't wait till spring.

 

[shortthrow50]

outside tinkering so here is the **** part of me. is this back window gaskt supposed to be just flopped over the trim like this? i dont see how it could be corrected because of some of the wiring but would be nice to know if someone could verify that their back window gasket is the same way. also, there is a gap where it isnt sealed all the way. again, i dont see how that could be corrected either. thanks. ill report back more pics and video this week when things dry out

 

[Bob77064]

Congrats looks great, I like that cab.

 

[AKfish]

The cab gasket doesn't look correctly installed. That's certainly not the way it's configured on my 5000 series cab! No way you should be able to just peel the edge and expose a gap!

I'd be talking to the dealer...

AKfish

 

[Martian]

I'm with AKfish, your cab doesn't look right. I'd ask someone with a 4x20 or 3x20 cab to verify but doesn't look right to me.

I'd call the dealer if they're still open or on Monday.