Just another junk chainsaw

[LD1]

Didnt work and 160mb

I'll have to see if I can get it downsized:mur:

 

[LD1]

Here is the 6400 oiler. A bit hidden and is indeed only a quarter turn adjustment. You possibly have some sawdust/oil mix packed in the hole blocking view of it.

 

[Treemonkey1000]

Hey thanks LD1 I looked all over that thing yesterday trying to dial it down. I have only run about 9 tanks of fuel through this thing so it isn't too dirty yet. I will take a look at it tomorrow after Church. The oil is empty before the gas so I don't want to burn up the bar or chain.

 

[xyz123]

I'll have to see if I can get it downsized:mur:

Got it to work after you downsized it. I downloaded to hd and going to upload to my youtube video account for ya.
Then just use that link to post where ever. Title name dolmar 116si I'll post a link here and chainsawrepair.

 

[LD1]

Perfect. Thanks. A link here is really all I am after. Not many people have ever heard of the 116si. But it sure is a sweet old saw. Wish they still made em like that:thumbsup:

 

[xyz123]

Here is the thread on CR site if you want to give them some info too. http://chainsawrepair.createaforum.com/dolmar/dolmar-116si-video/new/#new

 

[LD1]

Just FYI, that is a video that I shot with my stock 116SI, with 16" bar and full chisel chain. Wood was approx. 14"-15" diameter tapering down to 11-12" diameter by the end. Ash BTW.

Just though I would share what the 60cc 116SI could do. It is what a 60cc saw "should" look like.

Thanks for taking the time to upload and post for me xyz123:thumbsup:

 

[Bluegill2]

I've been wanting to register to ChainsawRepair, but it wouldn't let me last couple times. I think I'm in this time...

Looks like a good forum!

 

[LD1]

It does indeed look like a good forum. I registered there when he first started. Its a bit slow, but growing. Takes time to get numbers and posts like TBN I guess.......

Unfortunately, I dont make it there much. I already waste too much time here:laughing: I dont want to get too addicted to any other forums. But they do have some really smart guys over there.

 

[LD1]

Oh, and bluegill, you really need to get you some dolmar saws:laughing:

 

[Bluegill2]

Yes LD1, I do need a Dolmar or two.

It's just these XP saws do me so well and I have too many of them!

Oh yeah, the last thing I need is another forum to suck up my time...But I'll be checking out ChainsawRepair.

 

[LD1]

It's just these XP saws do me so well and I have too many of them!

NO such thing as having too many chainsaws:laughing:

 

[Bluegill2]

NO such thing as having too many chainsaws:laughing:

You're right! I need to get my priority's straight.

 

[xyz123]

It does indeed look like a good forum. I registered there when he first started. Its a bit slow, but growing. Takes time to get numbers and posts like TBN I guess.......

Unfortunately, I dont make it there much. I already waste too much time here:laughing: I dont want to get too addicted to any other forums. But they do have some really smart guys over there.

We will take slow quality post helping people out then a bunch of BS post in quantity of bickering about brands and such anyday.

 

[LD1]

We will take slow quality post helping people out then a bunch of BS post in quantity of bickering about brands and such anyday.

I cannot say that I disagree with you there.

I imagine your site is like what the "old timers" describe TBN as a decade ago, where you could read every single new post and what not.

Frankly, I really dont have much to contribute for your site I dont know much about the innerds of anything other than the dolmars I have. And it seems 660magnum is quite a dolmar expert over there.:thumbsup: I certainly know where to go for help though if I ever get stumped on something.:thumbsup:

 

[xyz123]

This 505 83cc just got scratched off the poulan list. Nice knowing ya but I got to make some room. All I can say is I'm not married to any chainsaw. :laughing:

Group pic of the PP415 PP445 PP475 PP505 WT505 before I start selling them all of slowly. Well maybe real slow as I'm not sure what series of saws I want to persue next. :licking: 65cc 71cc 77cc and 2 83cc in pic.

The PP425 and other PP505 are in tore down stages and for parts for others right now.

 

[xyz123]

Just goofing off alittle today with a mild ported 70.7cc work saw. Yes a pipe makes any saw sound great.

Seemed to cut real good too. Will do more later.

 

[Artisan]

Gents I am a huge fan of nice tools, and moreso of tools I purchased new, so I KNOW they have not been treated like Taliban in Texas. I have a few Stihl's but I know Husqvarna is a quality as well (???) . I am in need of a chainsaw w/ some beef and I am considering a Husky 555. If I buy this bad boy in KALIFORNIA am I buying a pos loaded up w/ SMOG/CARB bs or are they all sold throughout the states the same way now-a-days? THIS package except maybe w/ a 24" bar and chain... Any input / opinions from the pros here as well as input on the SMOG Q ?

 

[Bluegill2]

Gents I am a huge fan of nice tools, and moreso of tools I purchased new, so I KNOW they have not been treated like Taliban in Texas. I have a few Stihl's but I know Husqvarna is a quality as well (???) . I am in need of a chainsaw w/ some beef and I am considering a Husky 555. If I buy this bad boy in KALIFORNIA am I buying a pos loaded up w/ SMOG/CARB bs or are they all sold throughout the states the same way now-a-days? THIS package except maybe w/ a 24" bar and chain... Any input / opinions from the pros here as well as input on the SMOG Q ?

The 555 is a Great Saw! As far as I know it will be no different sold in Ca as any other state. Chainsaws not the same as cars & trucks...

 

[xyz123]

I have no clue on the Calif epa stuff on a 555 there. But great saws this way. Just a detuned 562 with small mount bar.

If you are wanting the hotter version, but wanting small mount. Jonsered 2260