Just some preventative maint

[v8only]

So after some snowclearing this weekend i decided to do some checking around and i noticed that my complete air cleaner assembly was very loose and only holding on by 1 bolt. Bracket 10A is held on to the back of block via 4 bolts that are extremely hard to get in unless you take off the exhaust manifold. So before they all fall out like mine make sure they are checked once in a while.

http://jdpc.deere.com/pimages/MP98/MP9865_________UN01JAN94.gif

 

[AKfish]

Good head's up for other owner's. Might also have some design similarities for the other 55 series machines, too.

AKfish