Hi I was 3 degrees last night i let it warm up a bit then started the machine while letting it warm up all the sudden the was a lot of hydraulic oil The filter blow open. so my question is was there water in the system and the only place i can see to let moisture in is on the back hoe ram should i be spraying the rams so the seals don't dry out? And if so how do i remove all the moisture? thanks
kubota bx24 2009
- Thread starter dennynep
- Start date
- Views: 958
-
- Tags
- kubota bx24
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,537
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
When was the last time you change hyd. and filter?
Older B6100 had same problem.
Older B6100 had same problem.
dodge man
Super Star Member
What kind of fluid are you running? Kubota makes a Super UDT fluid that might flow a little better. When it’s really cold hydraulic fluid gets thick and that could have been the problem.
Hey Thomas about 300 hours / 5 years Hi Dave i do believe it was some less expensive oil now i have the super udt in it. I removed the oil plug and moved the pistons on the backhoe and front bucket and steering wheel to try and remove all the fluid. I guess i'll have to see what happens.
