KUBOTA L5030 PTO Not working
- Thread starter VIC EADIE
- Start date
- Views: 5451
-
- Tags
- kubota l5030
slowzuki
Elite Member
- Joined
- Sep 19, 2003
- Messages
- 4,100
- Location
- New Brunswick, Canada
- Tractor
- Kubota L5030 HSTC, MF 5455, Kubota M120, Allis Chalmers 7010
HST model? Are you mowing? Does it engage when not under load?
If it doesn't engage at all, the lever may be disconnected. If it slips under load, you may have a burned up pto clutch or a filter is so plugged the pto clutch doesn't have enough pressure to operate.
If it doesn't engage at all, the lever may be disconnected. If it slips under load, you may have a burned up pto clutch or a filter is so plugged the pto clutch doesn't have enough pressure to operate.
dex3361
Elite Member
- Joined
- Aug 22, 2008
- Messages
- 3,494
- Location
- N. of Charleston WV
- Tractor
- Kubota L4400-1 HST,FEL, 3x3 remotes, TNT. BX1500 54 mmm
Welcome to TBN. As slowzuki said check your cable from the PTO to the lever that it actuates. This lever controls a hydraulic valve that operates a clutch pack for the PTO. So if the pressure is low or the valve is not operating thats the place to look. More details would help in diagnosis.:thumbsup: