kubota l5030

Hi Experts, Wanting to gut check a potential tractor buy. Looking at a 2003 L5030 GST with 900hrs, comes with FEL and curtis cab, and has a set of rear remotes. It's immaculate, has full service records, and haven't found anything comparable in this price range in my region. I've negotiated it...

Do your work in comfort year round! 2007 Kubota L5030 HSTC 4X4 Only 1048.5 Hours! 50 H.P. - Pre-Tier IV Emissions No REGEN, No DEF Filters Hydrostatic Transmission-3 Range Cab with Heat/Air/Stereo LA 853 Quick Attach Loader Quick Attach Bucket with/grab hooks Front and Rear work lights...

Went with a cab with heat and AC this time. Will be nice for the cold weather. And it fits through an 8’ high door nicely.

About four days ago I parked my tractor and yesterday I went to start it and it would not start. There was no clicking, no attempt to turn over no nothing. Everything else is working fine. All dash lights, head and tail lights, radio, heater fan, etc. The battery is only about 4 months old and...

4X4 Kubota Tractor w/Loader, BH90 Backhoe. Low hour, Pre Tier 4 Emissions! NO REGEN, NO EXTRA FILTERS-NO DEF NEEDED. Year 2004 Manufacturer-Kubota Model L5030 HST - Hydrostatic Trans Serial Number 34278 Only 889 hours now, hours going up a little as I use it. Front Tire Size - 10-16.5 Rear...

I have a 5030 that I somehow by accident set the dashboard to metric. I would like to get it back to English. Does anyone know how to do this. I have searched the manuals and I must be missing how to do it. (I would think they would tell how to do this, but I do not see it. Thanks John M.

My new to me 2004 Kubota L5030 HST. It’s in nice shape for the year with only 785 hours when bought. I’m at about 808 now. I’ve been mowing with rotary cutter and now moving a bunch of sandy loam type topsoil. Great to be back to hydrostatic! Anyone own one of these? And how has yours been for you?

I broke the leveling lift arm on my 5030, New it is around $600 through kubota. The parts to repair it are $350. I see Tisco has them much cheaper. Does anyone know if they make one to fot the L5030 ? ..Thanks

I was killing some time at the Kubota dealership the other day. I was looking at the new little Lseries HST tractors. They did not have a lever on left side for cruise control. They had a slot with the decals but no lever. Is it optional? What about the older HST L5030's did they come standard...

I have a L5030 cabbed tractor that was hit by a drunk on the right rear tire breaking the housing on the rear axle. Also the right door broke. All other parts are ok. Front end loader,2400 hours on engine, runs great. All parts are in great condition, other than right rear. This sob had no...

I have a 2006 L5030 hst cab model that was hit in the right rear tire by a drunk with no insurance. I知 not getting anything for my tractor and I知 gonna lose my business. The wreck cracked the rear axle housing and the transmission. Every thing else with the exception. If the right door is...

TBN group, last night I was idling along on the tractor when it suddenly belched a bunch of black smoke out the exhaust, then the engine coasted down in power till it died. Battery light was only light lit. It needed replacing anyway so I dropped a new one in it today, then attempted to start...

My L5030 rear 3-pt will not drop unless I put (my fat-***) a lot of weight on it. Even at 220lbs I have to jump on it. Things I have looked at: r removed top hydraulic valving and inspected the speed drop lever to make sure it was not broken and connected internally inspected all the springs...

Hi Everyone, I noticed an oil leak from under the bell housing split pin the other day and immediately my heart dropped, thinking it was the rear main seal. However, a few threads here noted it could be the front pinion seal so I removed the front drive shaft cover and found a mess of front...

I need some help! I was mowing Saturday when I shut off the engine I heard a click. I went to restart the tractor and all that happened was the start relay buzzed. I checked the fuses underpass and by the battery and none were blown. The relays checked out fine as did the ignorant switch. I have...

I do a lot of snow removal with my L5030, however, I have been having a problem with the joystick freezing up at night or at times just shutting down for a couple of hours. If I start the tractor and let it run for 35 to 60 minutes I can get the blower to raise and turn the chute to the left...

I have had a L5030 for about three weeks now. Today I tryed to change the three point lift drop rate. I could not rotate the knob at the front of the seat by hand. I was able to turn it maybe 10 degrees with vise grips. I am afraid to force it any more. Tractor has 298 hours and is 11 years old...

Hi All: I noticed that my L5030 HST has developed a slow leak around the shaft that controls the PTO engagement (see attached pic). I suspect it's nothing more than a seal somewhere but Kubota doesn't have a parts breakdown of this unit (Part # TD060-51450) and the online price for the...

Finally made some progress on the third function today. I'm trying to use parts that I have already got lying around, but the need for different hydraulic adapters is always greater than the supply.... Anyway, 3rd function will be diverted from the curl circuit. The 6/2 diverter will be located...

Got the forks from a scrapped forklift for a decent price. Have to cut off old mounts, mill them straight, move them and weld on the Trima hooks to fit my loader. Lots of cutting done, getting ready to start welding instead... / Marcus EDIT: The tractor thread is here ...

Will add a hydraulic cylinder to the existing QA lock mechanism. Using a small cylinder I already have but will have to weld on attachment points. More photos will be posted as the project progresses. Br /Marcus EDIT: The tractor thread is here ...

I plan to add a third RR and also re-instate the 2nd which is currently disconnected. Its QDs are instead connected to the hydraulIc PTO circuit. But the idea of a hydraulic PTO at the back of the tractor appeals to me so I want to keep that as well. Preferring to stay with the original style...

Picked up an L5030 and want to add front hydraulics to it. Looking for a kit or a way to fabricate something to make this happen. I got a quote from Kubota for 800 for the hydro kit but not sure if that comes with the lines or not. I am trying to do it a bit cheaper if I can. Anybody have...

I am looking for some help regarding the cruise control. I just recently bought the tractor. The dealer is 4 hours away so I emailed him a list of issues to fix before sending. One issue was the cruise control would not work. When you move the lever, the hst pedal moves to appear that the...

I cant believe my roof blew off a Kubota L5030 Grand HST today, while going down the hwy. Kubota wants almost 1600.00 for a new roof assembly. Has anyone every had this problem. I was thinking about making my own, using sheet metal. Any ideas? :confused:

Hello all! This is my first time posting on the site although I have been lurking for the past several months since I bought some property and starting looking at tractors. We have a little shy of 100 acres that we are planning to build a house on. I will be using the tractor for gardening...

In need of some general information. My friend is looking at a Kubota L5030 with a hydrostatic transmission. A dealer has it on the lot for $9000 and I have not seen it yet. It has 2400 hours and is a 2003 model with loader. We do not know the service history other than used in a poultry...

Looking ot put a third function on my FEL as well as my BH92. Does anyone have any experience doing this?

I have a L5030 with a LA853 FEL. The left side at my bucket is about 1-1/2" lower than the right side. Tire pressures are fine, I actually measured all 4 wheels at the center of their respective hubs. I also measure at full height as well to be sure there wasn't a lead-lag situation with the Hyd...

Have been looking for a 5030 for a couple of years, found a 2009 with 1030hrs that looks almost as new. Has been used exclusively on private property without road salt, so no rust. Spec: L5030HSTC with heater and A/C, turf tyres Belos front mount with 4-point QA Siringe 200cm V-plow fully...

One day last week my tractor wouldn't start. It cranks and begins to run, then dies after one or two seconds. With the stop solenoid removed, it starts fine. I tested the solenoid outside the tractor, and energizing either pin caused it to retract (as it's supposed to). I convinced myself that...

Afternoon, looking at a well maintained L5030 HST at a local dealer that has a considerable amount of hours on it, 2600 hrs. The unit is in better shape than most 1000 hour units I've looked at, but is sitting with a weak hydro at the dealer waiting to be repaired. Dealer isn't sure what the...

I've recently listed my 05' L5030 for sale. The tractor has been flawless until yesterday. I went to start the tractor and it is completely dead. Battery is good, but the tractor acts just as if the battery was disconnected. I need to get it running ASAP. Does anyone have any tips as to where to...

One of my guys put Rotella T6 5W40 in the crankcase of my Grand L5030 during an oil change today. What do you think? Is this okay or should I pull it and put in the dino 15W40 that's always had? Just concerned about the lighter weight, but mindful that many diesel engine manufacturers have...

Son in law's L5030 just got a UDT hydraulic oil change and not long after he found the PTO engagement to have become difficult. Not as before the change. He put in the correct amount of oil and double checked it. everything works OK except the engagement of at PTO. Any ideas out there as to...

I have an opportunity to trade my L3130 with 900 hrs for a 2002? L5030 with 1500 hrs. Mine is a glide shift and the L5030 is hst. My father is the owner of the bigger tractor and is going to trade it in for a new, bigger one. He asked me if I wanted his and he would trade in mine. I like the...

Does anyone know what model number front end loader fit a 2004 Kubota L5030HSTC? Doubt if I can find one but who knows.....

Has anyone installed a W. R. Long Rocker switch valve kit on a L5030. If so was the kit complete and the instructions clear or did you have the dealer install it. I am looking for one for my grapple.

What are some good FEL's to look at for buying one for my L5030. I really want a "clam" type bucket. I know Kubota has the LA853, but, it doesn't have the clam option I want. Thanks to all in Advance

Does anyone know if you can mount a FEL on my L5030 without removing the snowblower sub-frame. :confused:

I have a problem with the power steering on my L5030. Unless I constantly turn the steering wheel, the wheels drift back to straight ahead, or almost straight. The steering shaft does turn from the column all the way into the steering box by the front axle. Is this most likely a hydraulic...

Just for folks reference, at about 2000 hours my heater fan gave out. Pulled the cab roof off and popped the fan out. Brushes worn out and the copper leads ran against the commutator down to the ceramic in the middle. I thought it might be 100$ for the motor, nope, 700$ at our dealer. Try...

First post here. Thank you for hearing me out. My friends owns a L5030 that's out in the field right now.. I'm looking for some basic knowledge / info on this tractor before I head out there to tackle the job. I have the service manual and I'm also a Mechanic by trade, so I'm not looking for a...

Is anyone aware of a setup like this that would work for a GL5030? I just have long hoses running from the back to the front now - not nearly as slick as this. Kubota L3200 L3800 Tractor Front Rear Auxillary Remote Hydraulic Hydraulics Kit | eBay

First off, let me introduce myself here. I'm getting ready to purchase a tractor for my new property and I have been looking quite heavily. I have 15 acres with some wet areas so 4wd is a must. I REALLY want a loader, bush hog is a must, and a box blade. That should be enough to get me...

Hi folks. I have a leak inside the cab in the front right corner. I suspect that the drain for the AC is blocked. Can someone tell me where the hose comes out, and maybe a quick easy way to unblock it. I was hoping maybe some compressed air forced back up the hose. Thanks in advance for all the...

I have a 2004 Kubota L5030. Somewhere I had read that I could mount a Kubota A853 front loader on my tractor without having to remove the front mounted Kubota snow blower sub-frame. And ideas where I might find some info. :confused:

I'm changing the hydraulic fluid (UDT) on my L5030 and noticed on the front drain requires a large alan wrench (The manual shows a regular drain plug but that is not what is there.) Does anyone know what size alan wrench is required. Thanks

Does anyone have an Idea on why my 2007 L5030 HST doesnt stop, or creeps when my toe is lifted from the foot pedal?

Just bought my wife a Kubota 5030. Can anyone direct me to a good general manual or repair guide. It is a 2006 with less than 300 hours. I have not had the time to review the hydraulic options on the tractor, but they seem somewhat limited. I have the joy stick for the front and lift...

I presently own a L5030 and it seems I'm always pushing the limits of its abilities. I use my L5030 for mowing grass, blowing leaves, plowing snow, logging (winch & loader grapple) and misc small dirt projects around here. The L5030 has R4 tires on it and it still compacts the soil leaving...

Been doing lots of work on slopes lately...digging out a dirt stock tank. Decided that everybody says to widen front end stance just make sure tires/rims are set so they dish "out, not in." Might be a good idea to do it now. Feeling that I would benefit from a improvement in stance, thus safety...

Started my 2005 L5030HST, moved it about 20 yards and shut it down to fuel up. Went to restart it and first thing I noticed is that the intelli panel dash was dead, no lights were working. I went to checking fuses, all were good, when I would remove the dash fuse and put it back in I could...

I was wondering if anyone has any suggestions before I start looking for the problem or taking it to the dealer. I have a 2006 L5030 GST that shifts easily into forward or reverse but once engaged the tractor will "buck" like the hydro fluid is being cut off momentarily then back on. It does...

Good morning. I have a 2005 L5030 HSTC and am installing a diverter valve for the 853 loader. I noticed in my fuse panel that I have 3 spare slots. Does anyone know where I would look for the other end of the wire? I would like to operate the new valve on a separate fuse but don't really know...

My brother is selling his Kubota L5030 hst that he purchased new in 2004. Sold his place and is downsizing. QA Loader LA853, hydraulics front and rear for bobcat attachments. Kept since new in pole shed, used primarily for mowing. 333 hours. Meticulously maintained. What's it worth?

I currently have an L3710 HST and could use a little more hp and a cab. I was going to put an aftermarket cab on it and have decided to look into upgrading to a higher hp model with cab. I have a 7' Lorenz 3 pt blower and a 400' driveway, which drifts really bad. I also mow about 5 acres of...

Has anyone had a problem with the fuel gauge on this model reading 1/2 to 3/4 when it is actually full?

Found one for sale around here for $6500...has 2750 hours,high floatation turf tires,HST,2 hydraulic ports,seller states he now lives in a condo and has nowhere to store it.Says he bought it new in 2004. This seems VERY cheap to me. Sent me some pics,tractor looks decent enough but hard to tell...

I purchased it a week ago and hooked it up that day and waited for the weekend to give it its first workout. It seems perfect size for my Tractor and I didn't want the "I wish i went bigger" problem. So I found a down top part of a tree which was junk, but figured i would give it a try just to...

I have a L5030HTC with about 600hrs on it, one afternoon last week I was pulling my rotary mower and after about 2 hours the RPM's suddenly dived. I pushed in the clutch and flipped the PTO off when it was around 1800 RPM's but it continued it's death spiral and shut off. I have had this happen...

I bought my 2006 used with 300+ hours on it last fall(2010) and my bad, didn't see the covered-up leak by the previous owner. It appears to have been welded and then covered the holes in the weld job with JB Weld and painted it to match. The cover is made of aluminum, so brazing is out. I may...

I'm looking for ideas to try a fix. I used the tractor for a couple of hours with a drag disk turning over the ground with no problems. All was working dandy until symptoms developed suddenly during this operation. Disk has been removed, symptoms remain. symptoms: Grand L5030 with nearly...

Does anybody know if Pat's Easy Change will fit on a 2004 Kubota Grand L5030?:confused:

I'm looking for another tractor I have a B2410 now and it just dont have enough HP at 10,000 feet to do the job. So here is what I have found I can get a new Bobcat CT450 fel quick attach bucket cab for around $21,000 with 0% for 60 mo. with trade with 3 yr bumper to bumper warranty. Cat1 3...

My battery is slowly wearing out. I looked under the hood and I see that the air cleaner has to be removed and the breaker bracket needs to be bent out of the way and then it might just have enough clearance past the rear of the headlight to be able to remove the battery by pulling it straight...

Hello all, I'm new to this forum and would really appreciate some expert opinions. I just got done changing the transmission/hydraulic fluid oil at 400hrs in my L5030GST, and noticed afterward when I shift from one gear to the next, would notice a jerky feeling when gear engages, a feeling much...

When i reverse into long grass the PTO stops working. Does anyone know why I can`t get it to engage.

My L5030HSTC has about 400 hours on its latest set of R-4 tires which has left the front ones completely bald while the rears just lost their whiskers. I drive a lot of road miles in the winter, which seems to be hard on the fronts. The stock 10x16.5 R4's are too small, and the slip ratio is a...

Hi I have a L5030HST that started leaking what appears to by UDT fluid from the front driveshaft cover joint, where it overlaps itself and from the weep hole located at or just behind the clutch housing. Anyone had this issue? It appears to be a serious problem to get to the source. The local...

Purchased new in 2007. 171 hours, garage kept, perfect condition LA853 Loader with Quick Attach system and bucket R4 tires with fluid in rear Rear hydraulic remote with hoses run to loader Synthetic engine and hydraulic oil used since 30 hours OEM filters only Root grapple by Unlimited...

In the sweltering heat in south Alabama, a/c in real important. Yesterday of course at 2pm while bushhogging the dang a/c quit cooling. I have checked and cleaned filters, what else can I do other than take it in for service (94 miles one way). Has anyone else had similar problems like this or...

I've rented the TC35D, and it gets the job done but not efficiently, and makes me smack my head sometimes. I need something relatively the same size to fit on my roads in the woods, I have some room to play here, but would prefer to stay as close to this size as possible. My purposes/usages...

I have a L5030 with around 2500 hours on it. I have owned it for 5 years now. We tried to use a bush hog on it and it wont even pull a 6 ft one. Carried it to the dealer and he put it on the dyno and it was doing 15 to 25 hp. He has had pump checked and injectors are fine. Found the...

Hey All, I've been looking for about 6 months and have found an M5700 with Cab, and Loader, and an L5030 HST with Cab and Loader. They both have ~500 hours and are similar in price ~23K, the L5030 HST a little higher. What are the main differences between these tractors, besides the obvious...

Excellent condition. Has Woods 1050 fel and Woods bh9000 bachoe. Needs nothing. 580 hours, $29500 225 gal 3 point sprayer Maschio Tiller, 5 shank chisel plow Sovema Flail mower, Landscape Rake also available. 218 831 7185

Woods 1085 FEL and Woods BH9000 Back Hoe $29,900

Hydrostatic Kubota L5030 with Cab, Woods 1085 Loader (better specs than L853) and Woods BH9000 Back Hoe. Excellent Condition 590 Hours Needs Nothing! 218 831 7185:thumbsup:

Excellent Condition! 580hrs. Needs nothing. With Woods 1085 FEL and Woods BH9000 Back Hoe. $29500 218 831 7185

Hello, I would like to say hello and hope for some assistance. I think I might have been unprepared and I probably need to wait until I get the maintenance manual. I had hoped to get the pinion and ring replaced, get lash measured and order the needed shims. Anyway, my front pinion is pretty...

I am going to buy yet another tractor and while looking at the L3240 then L3940 and L4240 open station tractors I found a 2003 L5030 HST with a cab, FEL and rear remote. I am interested in the differences between the Lxx30 and Lxx40 series and how significant. I have bigger tractors if needed...

I have R-4's on the rig now. (17.5-24 & 10-16.5 front) I want to go to R-1's mainly for increased clearance (I want a taller tire) It lists the 14.9x26 & 13.6x28 as the R-1 options. Is that the tallest tire I can put on it? Anyone tried to put taller tires on? I'm not worried about putting...

I am going to look at a 2005 Hydro L5030 cab Kubota LA853 loader it has around 450 hrs. 4WD,6' bucket,hayspear,6' Woods bushog (forgot rotary cutter #)the only thing i do not like is it does not have a hydraulics out back.I called Kubota dealer and they estimated $1500 to install one.He wants...

I am thinking I may have to sell my tractor and would like a value if anyone has a blue book. It is a Grand L5030HST with 160 hours, FEL, and Backhoe with 24" bucket. It is in very good condition. Thanks!

I have a WSM manual c/w the Electronic Panel Quick Guide that covers GL3130 to the GL5030 availible. I paid $173 (have receipt) for both and since I now have a GL5740 don't need it. Since I never had a problem with the tractor, the manual is in pristine condidtion. Asking $90 plus shipping...

Well after months of looking and thinking my future father-in-law finally decided on a tractor. We have been looking for something that is 45+hp with cab and loader. He is new to the tractor world but has a few hundred hours worth of dirt work at his home (10 acres) and he also owns 98 acres...

Hello folk's, I am fairly new to owning a Kubota L5030 HST. While bushhogging it seems that the floor board seems to get extremely hot, especially on the left side. I was wondering if any of you have experienced the same thing. If so, what can be done about it. Thanks for your time.

I have a Kubota Tractor L5030 GST and it runs but will not move forwards or backwards. I was moving a tree stump and slid sideways about a foot and that is when the tractor would not move forwards or backwards. Has anyone every had this problem before? If so what do I need to do to fix it...

Hi I wonder if anybody might be able to help with filters for my L5030 gst. In England the Kubota dealer prices for filters are exhorbitant and wondered if anyone had found an alternate supplier like fleetguard or donaldson. I need a hydraulic filter which I am led to beleive the Kubota number...

I just got a WR Long grapple with the Long Electric/Hydraulic valve kit. Any suggestions on where to get power for the valve that will hot only when switch is in on position? I do not have a shop manual so any advice is appreciated. Thanks

I am about to buy a new tractor. I have seen a couple of L5030s with the HST for sale. Does anybody have feedback on the quality of these? Thanks

My HST 5030 has got me vexed. I hauled hay (round bales) last week and when I parked it all was well. Monday night I started it, warmed it up for 5 minutes, increased engine rpm to 2000, and pressed the forward pedal. It immediately died and I heard a clicking sound somewhere on the right...

Good evening, I was in need of a larger tractor for my farm, I posted in the JD section looking to see what my tractor was worth, I sold the green one and came back to orange and think I did okay. Paid $16500 for a 1000 hr L5030, HST, LA853 loader, 2 new front r-4's and a new 3 prong quick...

Hello. I have a 2004 L5030 HST. I recently started having an issue with the PTO engagement lever. Seems that I have to fiddle around with it to start the tractor even though the PTO itself is not engaged. The PTO indicator light comes on so I have to move the PTO lever around until the light...

I finally had my remotes put on my L5030 as a few parts were backordered from Kubota. My question relates to me coming home and hooking up the Split-Fire 3pt wood splitter. Everything hooked together perfectly and I knew I would have to hold the control open and a bungy did that fine for now...

I have a 2005 L5030DT GST with R4s and a LA853 Loader and 1 rear remote with 245 hours on it how much should i sell it for????

I went to my dealer and picked up the materials to do the service. I guess I wasn't prepared for the $330 price tag that went with it!!:eek: I did get synthetic motor oil and the super UDT tranny/hydraulic oil. I was kind of taken back a bit with the $65 hydraulic spin on filter, but then...

I have been reading for a while on how good these are. I am interested but from the pics I have seen I seem to have it in my mind that back blading might be a problem (heavy, front tires off the ground). Will it hold in the bucket alright? I have no problem in seeing that forward motion is...

Ok... well, I learned something, thought I'd pass it on. Tractor was running purrrrfectly dandy but I knew the low fuel light was on. It was also leaking slowly at the fuel filter... bad O ring gasket.:( Making a mess and costing $$. I replaced the gasket... pennies from the Kubota dealer...

HELP, just traveling back through the woods to do a little backhoe work and my L5030 died and won't start back up (or even turn over). No wierd noises or anything that makes me think something is wrong, just died. The mid-pto icon on the Intellipanel is lit up the only problem is, I don't have a...

I am trying to make a final decision about one or the other of these used tractors - both with about 150 hours - both in excellent condition as far as I can tell. They are also similar in equipment FEL, rear hyd etc. I do a mix of bush hogging, loader work, snow blowing (rear) general farm...

I'm in the process of doing the initial 50 hour service on my L5030 HST. According to both the owners manual and shop manual there are (4) drain plugs for the transmission. Both the manuals are identical in showing all four plugs in clear detail. The (2) large center drain plugs are of same...

I changed the gear oil in the front axle of my L5030. The manual indicates it takes 9.5 qts -- but I sure couldn't get that much in. I drained both sides but only could get around 7 quarts back in. How do you get the rest of the old stuff out . . .? Obviously a bunch was left in that didn't drain.

Any know where I can download a pdf part manual for my L5030. I got one for my m6800 but can not find one for a 5030. Thanks

Sure nice to have the a/c in the cab on a 80 degree day.

I went with a friend this morning to the Kubota dealer where he bought his L5030 at this past spring. Its got 76 hrs on it and he figured it was time to do his "50 hr service"..???..:eek:....which HIS DEALER told him that many skip that and do it at 100 hrs..:confused: He bought all the filter...

Anybody have an ideal on where to find a rear hydraulic remote for an L5030. (Part No. L8303 & L8305) I've called it seems like ever dealer on the east coast and everyone calls it a "holds goods" part and do not stock with the Kubota warehouse out until June 1. Any help is appreciated.

I do custom hay baling as a side job. I have a M6800SDC and I just bought a L5030 hstc. I got it so my son could rake for me. I was thinking I may buy another disc mower so he could also help me cut. I run a 9' JD cutter with my M6800. I would like to know if the L5030 could handle around a 7'...

I have a L5030 tractor (800 plus hours) with a new L853 loader (less than 10 hours). The loader is very jerky on the descent . . . very smooth raising, very smooth with dump function, but if the bucket or grapple is high and I'm lowering it, I have to go quite slowly or it is very jerky . . . is...

Just wanted to know what you guys think about this quote, seems like a good deal. L5030 GST, 4WD, LA853 loader, Ag tires, skid steer coupler - $24,350.00

I do approx. 70 residential driveways with my M9000. The clutch is driving me crazy. I want to trade it in for L5030hst but afraid L5030hst wouldn't have power to do 70 residential driveways. I have an inverse snowblower. Will the L5030hst be able to handle 6 inches of heavy wet snow? thanks...

Went tractor shopping with a friend yesterday and he looked at a new L5030. With a Kubota BH and a Kubota FEL on it..and rear remote HYD's...the dealer gave him a "first go-round" price of 35K.?? On the way home..he told me that was "outragious"..?? Is it?..I sure dont know??? But when I...

I picked up my fluids and filters for the 50 hour service on my L5030HST a few days ago. The tractor has 53 hours on it, and I need to do about 10 hours of blade and tiller work with it in the next week. I was prepared to do the service today and tomorrow, but the owner's manual is missing. I...

Here is a price I got last week on a new Grand L5030 HST with R-4 tires and no loader. What do you guys think? $22,050.00

Thinking of selling my tractor and going bigger, and getting a cab, wondering what I might be able to get for it. I was unable to find any pricing guides or anything. It's a 2005 L5030 HST, la853 loader w/ skidsteer plate and 72" bucket, and filled R3's. has 60 hours on it and looks great.

I need to replace the A/C fan belt. If anyone has replaced this belt I would like to know if the replacement belt will slip between the fan and the fan shroud, or will I need to remove the fan? Thanks Jim E.

The forums on this web site have helped me considerably in determining which new tractor I am going to purchase. I appreciate each of you for the invaluable information you share. I, like many others will be purchasing a new L5030HST. The only options I plan to purchase are front end weights...

The forums on this web site have helped me considerably in determining which new tractor I am going to purchase. I appreciate each of you for the invaluable information you share. I, like many others will be purchasing a new L5030HST-F. The only options I plan to purchase are front end...

Hello again, I am still agonizing over a tractor choice. This has been a two month obsession. For some background I have recently purchased 80 acres of timber and CRP. Around the house I will intitially want to tear up some old concrete. After that it will be used for mowing the CRP, making...

Hello, I thought I had decided on an M series however the dealer has a brand new L5030 cab which is significantly cheaper than the M. I have 80 acres of timber and CRP including 5 acres around the house of pasture and 3 acres of lawn. I mow with a zd28 so don't need the tractor for finish...

I ended up with the following: L5030 HST CAB Tractor -rear wiper, rear work lights 853 Loader -QA heavy-duty round back bucket -Woods toothbar -3 chain hooks Woods Brushbull 6 ft Cutter - model 720 Land Pride box blade BB2572 Land Pride LR2584 landscape rake -dual guage wheels I spent about...

It looks like I finally have to make a decision! I am supposed to be at the dealership (35 miles from my home) tomorrow morning to sign papers on one of these tractors. I was set on the 5030 HST and had not even thought about trying a GST model - never driven one before. Wow, I was impressed...

The post "When Strangers Show Up" got me thinking more about securing my tractor. I am building a home on a somewhat secluded acreage and have no choice but to leave the tractor pretty well unprotected - in a fully enclosed canopy, but not locked up. What have others done to prevent theft of...

Greetings, I am new to this group and a new tractor shopper. However, my husband is an experienced dairy/beef farmer. We currently have a 15 acre horse farm and will also need to care for aging father in laws 15 acres. Mostly mowing, some material hauling such as mulch, stall bedding, and...

Does anyone have any tips on how to increase the A/C cooling? I have cleaned all of the cooling fins and screens. Do the freon kits they sell at Wally-World and elsewhere to add freon do any good? There is a site glass near the front of the engine, should I see bubbles or not? Thanks Jim.

I'm thinking about buying a L5030 with a cab. I'm concerned that it might not cool enough. I'm in Georgia where it get real hot and real humid. The specs say it has a "temperature differential" of 7 to 14 degrees. If it is 100 does that mean the cab will be 86 to 93 degrees? That doesn't...

I was ready to buy a Kubota with a cab and then found out John Deere has the 4720 in a cab. The dealer (sells both) recommended the Kubota (less $). My question is the cab. John Deere claims a 30 degree temperature differential and Kubota claims 7-14 degree differential with the cab. Does...

Hello everyone. This is my fiirst post here after observing for over 3 years. I currently own a BX-22 TLB and a RTV900. Since buying the BX we have moved from 3 acres to 50 acres. Of course now the BX isn't big enough. I need a machine to pull a square bale baler, mower conditioner and hay rake...

Okay, long story... I am putting up my 89' crank up tower. So, I need to dig a hole 5x5 and 8 feet deep. 7 cubic yards of concrete to hold this thing in place. I weld up the rebar cage and it weighs almost 300 pounds. Two #9 rebar 8 feet long in each corner with #4 horizontal 12 inch on...

I spent a while reading the freakin' manual... always dangerous... discovered in the electrical section that there is a little 8bit CPU, ram, and digital communications running all around in the 5030 (other models too). You can even program the booger in case you change tire sizes, etc. Lots...

I DO COMMERCIAL BUSH HOGGING AND UNDERBRUSH CLEARING. I NOW USE A L3400DT W/FEL. I NEED A LARGER TRACTOR I THINK. HAS ANY ONE USED BOTH IN HEAVY USE SITUATION. WHAT KIND OF PRICES CAN I EXPECT. WHICH TRACTOR WOULD BE THE BEST. ANY HELP APPRECIATED. THANKS IN ADVANCE.

buykubota-ML-852160-ML- Posted in wrong forum. Kubota specific post.

I AM TRYING TO COMPARE THE L5030 AND THE M4900. I NOW HAVE A L3400DT AND I AM LOOKING TO MOVE UP IN SIZE. HAS ANYONE PRICED OR BOUGHT ONE OF THESE TWO TRACTORS. LOOKING FOR BOTH W/CAB AND FEL. I DO COMMERCIAL BUSH HOGGING AND UNDERBRUSH CLEARING. NEED HELP WITH PRICES AND WHICH TRACTOR IS THE...

Since I was not shy at all about posting any issues I had with my L5030HSTC, I thought I'd give a brief synopsis of 2 years of ownership. You know, after I've actually had this particular tractor for a few hundred hours and have really used it in about all conditions. When I first got the 5030...

Okay, I think I've narrowed all my choices down to the L4330 or L5030 with GST. I tried out the HST and GST models this morning and really like the GST better for my primary useage. The L4330 is $24,000 with a LA-853 loader w/ toothbar and the L5030 is $26,800 with the same loader. I'm going...

Has anyone played around with the wheel width settings on an L5030? I have very hilly property and am considering upgrading to one of these machines, but the track width is very important to me for stability. I mostly interested in the R1 Ag tires. Second question is about a rotary mower...

Ok guys before you look at these I am not posting these to start any arguments or whatnot about any particular brand of tractor. I am just posting these pics so take them as you will. Most of the pics are of a Kubota L5030 and a DK55. Both about 45pto hp and both with a list price of around...

What a beautiful day...not a cloud to be seen, the sky so blue it hurts the eyes, 27F in the bright sunshine at mid-day, and a wonderful orange glow in my driveway. http://www.tractorbynet.com/photos/showphoto.php/photo/2755/sort/1/cat/529/page/1 Next week, the dealer will be taking it back to...

Just upgraded from a l3010 hst to a new 5030 hst , r4s quick detach . heavy duty bucket. I installed 3 kubota remote valves. running a Gannon box scraper with hydraulic rippers , top and tilt. in the process of fabricating a quick detch brush/ rock Grapple with hydraulics. Question? ----...

Where can I get a Transmission cooler for my New L5030 w/ Cab? Does Kubota offer one? Where can it be installed? This is my second "L" Series and the heat is a real issue. The L4330 I had before did NOT generate the heat this L5030 does. Comment are welcome GLWBEAR SC

Well I made my choice and I want to thank everyone. Now I won't have to post any questions in the buying forum for a while. I decided to get the L5030hst 4wd with loaded R4's, LA853 FEL, 4 way joystick controls, skid steer quick coupler with HD bucket, rear work lights, 6Ft Bush Hog I hope...

After looking through stacks of information on the three tractors, I am finding myself more unsure as to which tractor may be best for me. I want to put a FEL on it and plan on doing a fair amount of bush hogging and tilling. I would be interested in all comments pro's and con's as well as...

I was looking around TBN and found that some of the members have some really nice front remote setups. Skypup has a really nice ergonomic handle to control a grapple on his. (I was looking at the pictures). So, I called the local Kubota dealer, and he said they didn't have a kit like that for...

Today I was burning three large brush and using my grapple on the front and landscape rake on the rear. I though i heard a funny noise but everything was fine. About 30 minutes later I got off the tractor and notice this piece laying on the floor board by my feet. It's 1/4" thick steel plate...

My L4330 was CAT-I, and of course so are my implements. When I received the L-5030 it came with a CAT-II three point and two spacers so I could still use my CAT-I implements. Although, the pin size of the L-5030 top link is the same size as my L4330. Is that correct? The top link has a CAT-I pin...

I am looking at an L5030 with an LA853 loader, lQuick Coupler, and 72" bucket with loaded ag tires. Very similiar, I think to what DieselJay asked about last week, but without so many bells and whistles. I thought about getting a couple of rear remotes, but my dealer says that it doesn't cost...

In my search for tractor information I stumbled across this site. What a find! I really appreciate the insight all of you bring to this process. I know that the comparison I'm seeking has been asked before, and I've tried to read what I can find in the archives here. I'm going to go ahead...

The Kubota dealer delivered my L5030 today after having them put rear work lights on it. As many know we have had 6 inches of rain and another inch in the past 10 days due to Hurricane Wilma. Anyway, I had to run out to work, so my wife handles the homestead and animals during the day. The...

Hey Guys: I've been toying with the idea of moving from blue to orange, and got the following quote. Not know much about orange pricing, I was hoping you guys might help me "grade" the pricing: L5030 MFWD Hydrostat Cab R1 Tires - Ballasted Dual Rear Remotes Rear Windshield Wiper Quarter...

Post deleted by JrsL5030

First off, a thanks to all on the forum who provided information throughout the month of September that helped me make an informed purchasing decision. I purchased the L5030 HSTC with 853 Loader, HD Quick Attach bucket, woods tooth bar, ATI Grapple kit (installed), and CD/Radio in the CAB...

JUST GOT IT HOME HERE ARE SOME PICTURES

i just sold my 3130 and bought a 5030 so i can have more horsepower and FEL lift capacity for a GRAPPLE to clean up my hurricane damage, and the dealer is now saying a grapple wont work on the 853 that i would have to go to the woods loader and i dont want it i want the kubota. can any help??

$27500 for a L5030HST with QA loader LA853, 6' bucket and joystick. R4 tires come with it. The only extra included in this price is 3 remotes. Top-n-Tilt would add $700 more on top of this. Other quotes are for a Rhino TW72 cutter for $2179 and a gannon heavy duty 6' box blade with hydrolic...

I have been reading for a few months now on these forums, and am strongly leaning towards the L5030. I need to buy before the end of October. Any suggestions or comments about this or similar tractors, options, features, and attachments would be appreciated. I have a new home on 50 acres. 5...

I am going to look at the Grand L 5030 soon so I would like to know in advance what would be a good price on the tractor with a loader and creeper gears. Thanks, Herb

owning-ML-722137-ML-

There was apparently a problem with my original post, so I am trying again. Is there a hydraulic strainer/screen for this model tractor, and if so where would I find it? Thanks (again).

Anyone know if there is a strainer/screen in the hydraulic system for this model tractor that needs cleaning, and if so where would I find it. Thanks

What would be a good price for a L5030 with cab cd player and quick attach loader? 200hr. also L3830 300hr with la 7?? loader. I have the 3830, but come across a deal for the 5030 with cab. I do love the 3830 though and was not looking for the 5030.

I just posted a message about fixing a leak in a hydraulic hose or fitting. After I sort that out how do I check the hydraulic fluid level and add more if necessary? I must be blind or something but I have been looking at the owner's manual and can not find how to do it. Thanks for the help...

How much should it cost for a complete dealer 50 hour service for my L5030? What should they do? Any help would be great...

This is just too obvious. I also think I've seen pictures of this home-made grapple here at TBN before. Is someone using pictures of one of our member's tractors? Ebay link

This is follow-up on a thread in the Kubota forum which when I initially posted I was planning on a Kubota but after some additional research I have started to seriously consider a JD so have started post to general forum requesting advice on the comparison. That gets me to my choices (changed...

As some of you know I posted a concern with the lack of power when grading with my new L4330 right after taking delivery. At 27 hours I have decided to trade it back to the dealer for a new in the box L5030 they just got in. It looks like the dealer and I are very close to making the deal work...

I just purchased a 2003 L5030 with BH90 backhoe. I disconnected the backhoe and connected the male and female hydraulic lines together (the ones that went to the backhoe). I'm now trying to figure out why the 3 point cylinders don't respond when raising/lowering the control lever. I have...

I returned my L5030 today to have the subframe(BH90) bracket exchanged for one that was not welded up crooked. While it was there I ask that they check the system pressure as the BH & Loader seemed weak. They called back and said the pressure was low and they will try to find the problem in...

An Ohio dealer gave me a cash price on a new L5030HST (no cab, no attachments) of $22,200 today. Does this sound about right?

Well, starting cutting this years first cut. We are late as I was gone out west for 2 weeks right when haying started. Well, I hooked the NH489 up to the Kubota L5030 and... It worked great! The hydrostatic is great and the tractor drags around the 9 ft mower like it isn't even there...

I just received a 2003 L5030 with FEL and BH90 Backhoe. It doesn't have hydraulic cylinder nor lift arms/linkages. I'm looking for the best way to add to the tractor - is the draft control worth adding? How much should I expect to pay to add this? Is Kubota the best source for the parts, or...

After many weeks of looking and research here on TBN I signed on the dotted line. June 25th is the big Delivery Day. Here's what I signed for, Kubota L5030HST, R4, 4WD LA853 FEL w/ Quick Disc., HD Bucket with Tooth Bar BH90 Backhoe, Sub Frame w/ 24" bucket Remote Hydraulics to 3PH (One Set)...

Here's where I'm at with my deal right now. Wondering how the pricing looks to others. L5030HST Kubota 50HP 4WD TRACTOR, R4 Tires $ 20,308.00 LA853 Kubota Front End Loader, 4-Way Joy Stick Controls $ 4,742.00 ***Skid Steer Quick Coup. & HD Bucket Incl. BH90 Kubota Backhoe Attachment, Sub...

I took delivery of my new L5030HST a few days ago. Thanks for all of the great advice given here. I am very new to the tractor world and learned an awful lot here. Way more to learn. Here is what I got: L5030HST (no cab) R4's, liquid filled L853 FEL w/ HD bucket Skid Steer quick coupler ATI...

My 5030 was delivered today. I was about as excited as I was waiting for my first child to be born...... isn't that pathetic? Of course my first goal was to scrape off some paint so I took it off onto a trail and started to knock down and rip out some pine trees. Small stuff, but the tractor...

Decided on a L5030HST. Only $1200 more than a L4330. Would appreciate any feedback any of you have on this particular model. Heres to the next 20+ years of operating it!!! KM

I have been looking at buying a Kubota or JD (nearest dealers for me) to begin cleaning up newly purchased 32 acre property. Will be using it for digging, small scale leveling, stump removal, rough mowing, fencing. Eventually we'll build a house and use it for our horses. After a lot of...

I'm buying a tractor in next month or so and have narrowed it down to a Kubota L5030. One dealer gave me a price of $26,500 for a L5030HST-F with a LA853 loader, skid steer quick hitch and a HD 72 inch bucket. Anyone know if this is a good price?

Well, we took the plunge! We will be driving to Bangor Maine to pick up an L5030 HSTC with 400 hrs on it this Friday. Dealt with Mike of Dorr's Equipment. We initially looked at this tractor in mid February and drove it a bit. It was at an employees house cleaning up after a big snow storm...

I am new to utility tractors and to this site. Recently bought 32 acres of which about 20 will be used for horses/pastures. Land needs a lot of work - clearing of trees, minor regrading, some digging, driveway, fences. I need to buy a tractor and am considering something in the 50HP range...

I changed out all the filters, engine oil, hydraulic fluid with Super UDT, and greased everything on my L5030HST over the weekend (I've got 100 hours on it). I located all the drain plugs on the transmission / rear end and removed them all when I drained the hydraulic fluid, and I refilled with...

Seems I have gone full circle in looking at and comparing tractors. I started out looking at the kioti and mahindra then decided to buy a kubota, now reconsidering. I liked the mahindra 4110 but decided I wanted a little more hp. Looked at the kioti dk45 then migrated to the kubota l5030, which...

I just bought a new L48 in N.H. even though I was only looking at the L series. When you look at the prices for a L5030 with the BH90, you are only $2,500 away from the L48 which is twice the machine in so many ways. The extra cash over a very long time is worth the additional cost of the L48...

OK you guys help me out here. The decision's been made on the model. It will be my first tractor purchase and I'm just not quite sure how to approach the dealers. I've been quoted by two and from what I've read here, they both seem very high. I'm looking at the L5030HSTC, LA853 FEL, R4 tires...

I have been thinking of purchasing a larger scraper (2.5 cy capacity) and was wondering if anyone knew what Kubota says about limits on the tow bar tongue weight and towing GVW for an L5030? The weight distribution is as follows: Scraper GVW Fully Loaded: 8,150 lbs Tongue Weight on Draw Bar...

I was all set to go with the HST. Took the wife to drive it. She didn't like the jerkiness of the HST (a lot due to not being used to the pedal, I'm sure). Plus I am wondering about loss of power of HST. Not sure I like the whine of the HST hydraulics. Have not found a GST to test, but have...

Pic from this past weekend...

I was planning on purchasing a L4330 with L853 loader. I need to take care of 110 acres. Mowing with very steep terrain, loader, backhoe applications, auger for fence posts, road maintenance, moving 3x3x8 square hay bales, and maybe tilling 1-5 acres. Have to maintain next to river; so lots of...

Got a factory T&T kit with a new L5030 and a box blade. The cylinder side of the 3 pt arm goes about 5 degrees down (below level) at full tilt. When tilting the other direction (lifting the cylinder arm of the 3 pt) it goes almost 40 - 45 degrees at full tilt!? Am I doing something wrong? Is...

Looked at a used L5030, HST, canopy, 60hrs, 2003, La853 loader without quick attachment, no remote hydraulics. The dealer is asking 21,500, does not appear he will budge. I really like this tractor but don't know if I can justify it and if this is a fair price. Tractor does not appeared to used...

Seems the dealer wired these in series with the headlights? In other words, I have to turn on the headlights to use the rear worklights!? Seems dumb and a huge drain on the battery when all I need is the rear work lights. Shouldn't these be wired directly to the battery or another circuit off...

I just bought an L5030 with a Tnt Kit. The hydraulic top cylinder was only 12 inches and did not reach the box blade. Is the Kubota hydraulic top link this short? How do I determine if the dealer is jerking me around and giving me third party parts versus a Kubota top link? (The manual top...

I have a L5030 with 75 hours. I was shredding in pretty thick yaupon and smelled something hot and a little steamy but the temperature gauge showed OK. I thought it might be the slip clutch on the shredder. A little while later smoke and a very pungent burnt odor came from the relief tube...

I've decided that I want to try to purchase this tractor. I've read most of the threads searching for a fair purchase price;however I've only found prices where people were buying a loader, etc. with it. I would like to know a fair price to offer for this tractor with R4 tires as the only...

I have a Kubota L5030 and need to purchase the largest/widest tiller the tractor can handle. I will use it on sports fields that have compacted clay. The tilling depth will be 4 to 6 inches. Any suggested manufacturers/model? Thanks for the help.

I have a Kubota L5030 and need to purchase the largest/widest tiller the tractor can handle. I will use it on sports fields that have compacted clay. The tilling depth will be 4 to 6 inches. Any suggested manufacturers/model? Thanks for the help.

Hello Everyone...I'm new here, this is my first post. I've been reading and researching on this site for several months now, and am impressed with the depth of experience and knowledge. I'm ready to buy my first tractor, and have narrowed it down to 4 models - two from Kubota and two from John...

I was on the phone with one of our local dealers trying to get a price quote on a Kubota L4330HST with front loader (LA853FL), which he gave me, $23,160. He also quoted me on a L5030HST with front loader (LA853FL) @ $25,930 which they have in stock. I'm not sure that I want the HST, but they...

I recently took the backhoe off my 60-hours-old L5030. Before doing so, I did my 50-hour maintenance, including changing the hydraulic fluid, with the backhoe on the tractor. Following the maintenance I removed the backhoe and put my rotary cutter on. For some reason the 3-point hitch won't lift...

I'm ready to buy my FIRST TRACTOR for mainly mowing 80 acres of flat pastures and 4 miles of level roads on my 344 acre ranch. I wanted to use an 8 foot lift type mower, but the dealer only suggests a 6 foot on the L5030. If I want to use an 8 foot lift type mower he suggests a M4900. Looking...

I just picked up a brand new Kubota L5030HSTC and the dealer is waiting for a FEL to come in. My question, is the Kubota factory FEL, I forgot the model number, the best FEL for my tractor? I traded in a L4310HSTC mainly because I needed a little more power and wanted more power with the FEL...